so im getting ready to go single turbo and im wondering how much power i can expect and how much boost i should run. here are my engine mods that i have or im doing.

stock ports, apexi rx6 single turbo kit, power fc, commander, datalogit, apexi fmic, 1200cc secondaries, 850primaries, supra tt fuel pump, xs power pack ignition, greddy profec b spec II boost controller, full exhaust, midpipe, pf catback, air pump elimination, greddy elbow w/ flange and greddy type s bov. koyo radiator, pettit alum. ast, new spark plugs and wires.

so how much boost should i tune for and how much power should i expect? thanks for any input guys.
__________________

 

I wouldnt turn the boost up at all if you dont get it tuned professionally.

 

I know Max Cooper was running that turbo/setup for a while. Search around or PM him, he could tell about what it'll make.

 

oh yea itll be tuned by either rx7store or banzairacing.

 

I still don't understand why people try to get "big" power on stock-ports. Even with a streetport you will notice a difference power; more-so on single turbo applications. Many have achieved 400hp that your looking for. But go check for the actual dyno graphs and compare them. The RX6 is a smaller turbo then what many here are running to get the big power. Regardless you wont miss the twins with that setup. All i'm saying is do your research and don't cheap out on anything in the long run it always costs more. Goodluck

 

Your fuel pump is gonna be your limiter. Probably high three's at 15-17 pounds, and that **** will spool nicely to boot!