Single Turbo RX-7's Questions about all aspects of single turbo setups.

Took Tuned T-78 to Track

Thread Tools
 
Search this Thread
 
Old Jul 5, 2004 | 11:24 AM
  #1  
Brian_93's Avatar
Thread Starter
T-88 FD
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 402
Likes: 0
From: Dallas, TX
Took Tuned T-78 to Track

I took out the T78 FD last night to the track to see what she would do, after tuning at Rotary Performance

404 rwhp 15psi and 307 tq


15psi on Nitto Drags


Reation .5236
60ft 1.7299
1/8 7.8569
1/8 mph 87.91

I broke the rearend on the run after Time for a Kazz and 6 puck
Reply
Old Jul 5, 2004 | 11:27 AM
  #2  
Marshall's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 1,023
Likes: 0
From: Edwards, CA
Thats a decent ET but that trap is consistant with a 330 rwhp car. You should be well into the mid 90s with 400 rw.
Reply
Old Jul 5, 2004 | 11:43 AM
  #3  
SPOautos's Avatar
Hey, where did my $$$ go?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 4,413
Likes: 0
From: Bimingham, AL
When my dyno was 412 I was trapping 98-99 in the 1/8. I wasnt launching the car so my et was horrible but I can attest to what Marshell is saying cause you time/mph is about what I was running back when I had around 330rwhp.

Something doesnt sound right really about those rwhp readings. Or maybe something went wrong between the dyno and the track

STEPHEN
Reply
Old Jul 5, 2004 | 12:14 PM
  #4  
sk8world's Avatar
Chasing numbers
Tenured Member 20 Years
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Yeah, Me too. I went 7.80 with 330rwhp.. (1.85 60 foot time)

I would think you would be more in the low 7's.
Reply
Old Jul 5, 2004 | 03:42 PM
  #5  
pluto's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 1,926
Likes: 0
From: fort worth, tx, usa
I ran a 8.69@86mph in the 1/8 with my cym using stock ECU running 8psi. Something seems weird with the mph, are you sure it was 87mph instead of 97mph?
Reply
Old Jul 5, 2004 | 04:23 PM
  #6  
djseven's Avatar
Eh
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Aug 2002
Posts: 6,554
Likes: 344
From: Nashville, TN
Originally posted by pluto
I ran a 8.69@86mph in the 1/8 with my cym using stock ECU running 8psi. Something seems weird with the mph, are you sure it was 87mph instead of 97mph?
What power was the car making at this boost level? Dont me to hijack the thread. Did you pull the boost pills?
Reply
Old Jul 7, 2004 | 12:23 PM
  #7  
Brian_93's Avatar
Thread Starter
T-88 FD
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 402
Likes: 0
From: Dallas, TX
This was my best past of the night missing third gear as well. I did trap a 90 mph on my 8.2 pass and 8.3 pass. I just cant seem to hit third gear right. What do you guys lanch at

I get 330 rhwp on 10psi low boost and 404rwhp on 15psi high boost.

Ps I should run 7.2 correct
Ill post dyno sheets soon
Reply
Old Jul 7, 2004 | 07:35 PM
  #8  
pluto's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 1,926
Likes: 0
From: fort worth, tx, usa
The car was bone stock with the exception of downpipe and catback. i was still running stock intake, stock I/C on that run. If I have to guess, I might be making 240-250rwhp at the time?


Originally posted by djseven
What power was the car making at this boost level? Dont me to hijack the thread. Did you pull the boost pills?
Reply
Old Jul 7, 2004 | 08:11 PM
  #9  
nemonuts's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 13
Likes: 0
From: okc
I launch at about 6000 on et streets and feather as long as i can on street tires. pluto just knows how to drive. I hate is when the rear end breaks. wheel hop at all on lauch?
Reply
Old Jul 8, 2004 | 01:38 PM
  #10  
Brian_93's Avatar
Thread Starter
T-88 FD
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 402
Likes: 0
From: Dallas, TX
I didnt get that much wheel hop at lanch, but the car would get out the line very hard without a problem, but the clutch would slip when i would put it in third going down the track, Then finally on the last lanch the rearend snap.
Reply
Old Apr 5, 2006 | 08:15 PM
  #11  
LUPE's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2005
Posts: 5,506
Likes: 0
From: Belleville, IL
Originally Posted by Brian_93
I took out the T78 FD last night to the track to see what she would do, after tuning at Rotary Performance

404 rwhp 15psi and 307 tq


15psi on Nitto Drags


Reation .5236
60ft 1.7299
1/8 7.8569
1/8 mph 87.91

I broke the rearend on the run after Time for a Kazz and 6 puck
That 1/8th mile mph is aweful
Reply
Old Apr 5, 2006 | 08:30 PM
  #12  
EKTwin93's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 434
Likes: 2
From: Kansas City, MO
Brian_93 is a crook, he screwed me out of ~8 months of my time and lead me on.....how do you like that T78 Brian, is that the same one that I bought from you that I never got??
Hmmm, burn in hell buddy
Reply
Old Apr 5, 2006 | 08:34 PM
  #13  
dubulup's Avatar
development
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
Originally Posted by LUPE
That 1/8th mile mph is aweful
what's up with bringing up every drag race thread??

trying to turn this into the "new" drag forum???


now go answer my turbo blanket question, before you boot it to the next page
Reply
Old Apr 5, 2006 | 08:35 PM
  #14  
LUPE's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2005
Posts: 5,506
Likes: 0
From: Belleville, IL
Originally Posted by dubulup
what's up with bringing up every drag race thread??

trying to turn this into the "new" drag forum???


now go answer my turbo blanket question, before you boot it to the next page


You know this........

Drag racing is just now starting........... I'm getting excited..........
Reply
Old Apr 5, 2006 | 10:04 PM
  #15  
dubulup's Avatar
development
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
COME AWN!!! getting kicked off the track!!

you buy your outfit yet?
Reply
Old Apr 5, 2006 | 10:21 PM
  #16  
jacobcartmill's Avatar
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
that trap speed is very low. i trapped 93mph in the 1/8th on 16psi on my t04b.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Clacor
Single Turbo RX-7's
19
Sep 11, 2015 08:36 PM




All times are GMT -5. The time now is 02:08 AM.