1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Jamaican rx7 restoration

Thread Tools
 
Search this Thread
 
Old Dec 23, 2003 | 04:35 PM
  #1  
JARX7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 13
Likes: 0
From: Houston Texas
Jamaican rx7 restoration

whats up folks.... this is my 1st post.. just got my 1st gen rx7 project car..after seaching for a long while. It's kinda in a bad.. shape now..(rust Problems esp in the front chassis leg on the left side infront of the front tire..
BUT it's the best one i could find out.. here. by the way not sure.. what year it really is. says on the the title 1982.. but seeing it's jamaican and everyting is bootleg.. i'm not sure. my vin starts with SA22c dah dah.. but i have 84-85 Dash,seat and rear vented disc.. also got it with gsl-se badge.. i hope to get started.. after christmas.. also have a 13b 6 port from a 2nd gen that i plan to drop in.. anyways.. here's some pics
Reply
Old Dec 23, 2003 | 04:39 PM
  #2  
JARX7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 13
Likes: 0
From: Houston Texas
back pic... camera kinda sucks.. but it's the only i could find at the time
Reply
Old Dec 23, 2003 | 04:40 PM
  #3  
rotor vs. piston's Avatar
Function > Form
Tenured Member 15 Years
 
Joined: Nov 2002
Posts: 10,890
Likes: 3
From: Catonsville MD (baltimore suburb)
Is the car fuel injected now, with rear vented disc that's an SE rear end so you just might have an GSL-SE.

Get some more pics up so we can investagate.
Reply
Old Dec 23, 2003 | 04:44 PM
  #4  
JARX7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 13
Likes: 0
From: Houston Texas
pics of the inside of the car.. Btw.. i got the car with some nasty rims and a nasty paint scheme
Reply
Old Dec 23, 2003 | 04:48 PM
  #5  
inittab's Avatar
I read your email
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 2,624
Likes: 1
From: NW New Jersey
Re: Jamaican rx7 restoration

Originally posted by JARX7
.. but seeing it's jamaican and everyting is bootleg.. i'm not sure.


Sorry that's just funny!


Anyway, welcome to the forum and congrats on your purchase! It looks like it'll be a nice project! If you can post some pics of the interior and engine bay maybe we can all help you identify it.
Reply
Old Dec 23, 2003 | 04:54 PM
  #6  
JARX7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 13
Likes: 0
From: Houston Texas
well i got the car with a dead 13b in it.. but it was'nt FI.. it had an edelbrock carburetor on it.. i also tried to jack up the rear end and turn one wheel to see if it had LSD but the other did'nt turn..




my other car
Reply
Old Dec 23, 2003 | 06:53 PM
  #7  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,999
Likes: 350
From: FL
welcome ...

the only thing i can think is to pull apart the interior trim in the trunk area and look to see if you find any lines that suggest its been chopped.

if it has been chopped then its a 79-80 that has been made into an 84-85.

if it has not been chopped then you have anything between 81-85 that has been tagged with a 79-80 VIN.

there's a minor detail that most people miss when they do this so take a picture of the hood (while closed) and focus on the area near windshield wipers.
Reply
Old Dec 23, 2003 | 07:55 PM
  #8  
fitzwarryne's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 278
Likes: 0
From: Cloud Nine & Peak of God
Most of the British West Indies used to drive on the left. If its a rhd all gen1s had the SA 22C vin number rather than the FB of USA models.

The later rhd cars had all the SE equipment except the 13B efi, many received a transplanted 13B when it was time for a rebuild The 85 rhd models also had the 84 dash rather than the dial air controls of the 85 USA model.

Again as you said it could be a hybred of parts of unknown origion.

Last edited by fitzwarryne; Dec 23, 2003 at 07:59 PM.
Reply
Old Dec 23, 2003 | 08:00 PM
  #9  
RacerX7fb's Avatar
paradox
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 1,296
Likes: 2
From: SoCal
Not positively sure.. but it appears be an SE with a Mariah Mode 1 body package
Reply
Old Dec 23, 2003 | 09:18 PM
  #10  
Lee Lyons's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 1,288
Likes: 0
From: Calgary; AB
Nice car. Welcome to the forum. BTW the interiors not as bad as my 81 with that nasty burgandy brown s*#$ which I plan on getting rid of. Other than that nice car it'll look even better done keep us informed.
Reply
Old Dec 23, 2003 | 10:06 PM
  #11  
JARX7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 13
Likes: 0
From: Houston Texas
thanks for the info guys.. i'll try to get some better pictures.. and i'll keep you updated on my progress
Reply
Old Dec 24, 2003 | 12:24 AM
  #12  
luiml73's Avatar
Rotary Powered Boobies
Tenured Member 20 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 2,530
Likes: 0
From: Miami Beach
I like what they did with the fog lights
Reply
Old Dec 24, 2003 | 09:36 AM
  #13  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,999
Likes: 350
From: FL
Originally posted by fitzwarryne
The later rhd cars had all the SE equipment except the 13B efi ...
actually, you're right and this totally slipped my mind. so it may not be as bad as i originally thought.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mazdaverx713b
Build Threads
48
Apr 21, 2016 06:45 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
runner83
1st Gen General Discussion
16
Aug 26, 2015 05:16 PM




All times are GMT -5. The time now is 06:31 AM.