i've seen a throttle body injection system on the market that mates to a weber style intake manifold bur for the life of me i can't remember the name of it or who makes it. if anyone has this information would you mind sharing it? :-)

Ray

 

TWM?

 

they make one.. injectionperfection is a nother.

 

that style of intake, with individual throttles. is the best intake you can get

 

Is this for a 12a?

 

twm makes manifolds for 12a and 13b, so you could get an efi setup from them for either one.
and i would imagine that the same is true for injectionperfection as well

 

I started a thread like this on the preformance forum... I didnt get maney responses... I would like to take a rb 4bbl intake and put a corvette tpi setup and through it on a turbo car... I dont know how maney cfm they flow... I have a few camaro tpi setups but those are only 2bbl setups.. I think you would see large preformance increase compared to the standerd efi setups... the only thing is I heard the tpi setups didnt flow too much air... I dont know how much but according to the domestic guys not that much... hell I wonder if I could get a twin 4bbl intake for a 13b and run 2 throttle bodys... god dreams dreams dreams...

 

you can get a twin 2bbl intake manifold from twm.. i have never heard of a twin 4 though

 

Either TWM or Redline make the throttle bodies that fit the IDA, IDF and DCOE style Weber systems.

 

parts from the junk yard when ever posable is the golden rule looking at the tpi and tbi setups yesterday I think they were flowing about 500 cfm stock... I think that a tbi setup would be easyer to do... correct me if I am wrong but all you would need to run that setup on a rotary is a aftermarket computer a addapter plate to your intake and a tps right?