3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Finished my vac hose job.. but i have a weird problem

Thread Tools
 
Search this Thread
 
Old Dec 6, 2002 | 10:29 AM
  #1  
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Nov 2001
Posts: 1,483
Likes: 0
From: US
Finished my vac hose job.. but i have a weird problem

Car idle weird.. stays around 1-1.5k rpm (idle like vac leak or something) back to 1k and back up to 1.5k rpm..
but if i turn the light on rpm stays at 1.5k rpm...

any idea?? my guess is i may put worng sensor in worng place... Vac is perfect.. its just idel..
last night when i test drove the car boostis perfect as well.. no over boost or boost leak..
belts are not tight enough???
hmm

Last edited by FstFD3SPOWER; Dec 6, 2002 at 10:34 AM.
Reply
Old Dec 6, 2002 | 10:43 AM
  #2  
wonder1and's Avatar
I Sold My Car 2 the Devil
Tenured Member 20 Years
 
Joined: Oct 2001
Posts: 2,361
Likes: 0
From: Duncanville, Tx
have you tried to adjust the throttle cable? its a touchy little guy so be careful.
Ryker
Reply
Old Dec 6, 2002 | 10:50 AM
  #3  
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Nov 2001
Posts: 1,483
Likes: 0
From: US
found the problem. .it was my gas pedal... its okay now..

thanks
Reply
Old Dec 6, 2002 | 06:15 PM
  #4  
apneablue's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 20 Years
 
Joined: Feb 2002
Posts: 3,045
Likes: 2
From: North Coast
Originally posted by FstFD3SPOWER
found the problem. .it was my gas pedal... its okay now..

thanks
Congrats Dude! I am pulling some stuff back apart to see if I can find out why I my boost is dropping after the secondary comes online...
Reply
Old Dec 6, 2002 | 07:01 PM
  #5  
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Nov 2001
Posts: 1,483
Likes: 0
From: US
thank you for ur help!!!
good luck with ur problem!!
Reply
Old Dec 7, 2002 | 02:39 AM
  #6  
kundo's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 227
Likes: 0
From: Montclair, CA
I've been doing my vac lines but I broke a solenoid by mistake but I haven't finished yet 'cuse I have finals next week so I have to let it sit a little while longer.
Reply
Old Dec 7, 2002 | 01:22 PM
  #7  
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Nov 2001
Posts: 1,483
Likes: 0
From: US
take ur time and do it right..
check every line with diagram...
Reply
Old Dec 7, 2002 | 02:55 PM
  #8  
puma's Avatar
canadian monster
Tenured Member 15 Years
iTrader: (2)
 
Joined: Mar 2001
Posts: 2,083
Likes: 0
From: Trois-Rivières, Qc, Can
what do you mean your gas pedal, what happenned?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
whinin
Introduce yourself
17
Mar 30, 2019 07:53 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM




All times are GMT -5. The time now is 02:10 AM.