need help car wont start
#1
Full Member
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: sioux falls, south dakota
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
need help car wont start
so here is whats going on. i have a na s5 5speed that i am doing a jdm tii swap to. i just put different engine and front body harnesses in my car. when i went to start it turned the ignition to on tested all the accessories and everything but my blinkers work. then i turned the key to start it and nothin happens. all the normal accessories turn off like normal when u go to start the car and it wont turn over also my the fuel pump doesnt turn on.
i took the starter off and tested it and it was shot so i bought a new one hoping that would solve my problem. i put that in and nothing changed.
i have an extra ignition switch layin around so i hooked that up thinking it might be a bad switch but yet again nothing changed.
next i tried bypassing the starter cut relay and still wouldnt start. i checked to see if there was power going to the relay and i had power to the black/blue wire.
i checked relays and connections and noticed that there are two plugs by the relays on the core support that are not pluged into anything and i have no clue what they go to one is a green plug with 4 wires the other is a white plug with 5 wires and a empty spot for a wire.
i took the starter off and tested it and it was shot so i bought a new one hoping that would solve my problem. i put that in and nothing changed.
i have an extra ignition switch layin around so i hooked that up thinking it might be a bad switch but yet again nothing changed.
next i tried bypassing the starter cut relay and still wouldnt start. i checked to see if there was power going to the relay and i had power to the black/blue wire.
i checked relays and connections and noticed that there are two plugs by the relays on the core support that are not pluged into anything and i have no clue what they go to one is a green plug with 4 wires the other is a white plug with 5 wires and a empty spot for a wire.
Thread
Thread Starter
Forum
Replies
Last Post