New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

88 fc map light not working

Thread Tools
 
Search this Thread
 
Old May 18, 2012 | 05:32 PM
  #1  
luis.v's Avatar
Thread Starter
Full Member
 
Joined: May 2012
Posts: 64
Likes: 0
From: allentown pa
88 fc map light not working

so i check the fuses and the bulbs everything is good were else should i check? don't really know were to start.
Reply
Old May 19, 2012 | 12:08 AM
  #2  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
That particular circuit has a Blue/Red wire which is supposed to have constant voltage on it, does yours? The other wire in this circuit is the ground wire and this wire is Blue/White. Check for voltage on the Blue/Red wire first.
Reply
Old May 19, 2012 | 06:45 PM
  #3  
luis.v's Avatar
Thread Starter
Full Member
 
Joined: May 2012
Posts: 64
Likes: 0
From: allentown pa
ok thank you i will check that asap.
Reply
Old May 20, 2012 | 03:50 PM
  #4  
luis.v's Avatar
Thread Starter
Full Member
 
Joined: May 2012
Posts: 64
Likes: 0
From: allentown pa
i just took it apart seems like the plug on the map light is completely missing all i see is three plugs one with just black wires and the other two for the sunroof switch. coming off the car was the blue/red blue/white plug just hanging there. would anyone happen to know were the blue/red and blue/white would be soldered to on the map light?

thanks for the help!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sen2two
AEM EMS
9
Oct 23, 2015 07:51 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM




All times are GMT -5. The time now is 03:39 PM.