Haltech Smog pump/ emissions...
#1
Full Member
Thread Starter
Join Date: Jul 2001
Location: Benton, Ar
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Smog pump/ emissions...
Ok, I've been trying to find info on how to wire up the smog control systems, and am not having much luck, from what I can tell, I need to use a PWM to run a relay that will open and close the relief and either the port or split air valve at 3000 RPM's. Which do I want to use? or does someone have some better trick?
Emissions here in Houston is about to become a PITA next month and my car is way overdue for inspection from being in the shop so long, so I really need to be able to pass emissions.
John M.
'93 Base VR
Emissions here in Houston is about to become a PITA next month and my car is way overdue for inspection from being in the shop so long, so I really need to be able to pass emissions.
John M.
'93 Base VR
#2
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
You will want to set the PWM to Dual Intake Valve. That has the on and off RPM setting in it to control it. If you want it on at idle and up to 3000RPM then set it to be on at 600RPM and off at 3000RPM.
Have wonderful day, today is my birthday.
Have wonderful day, today is my birthday.
#3
Absolute Power is Awesome
Old thread!
I'd like to set up my Haltech to feed air to the cat. I know I want to control the split air solenoid valve. Is the valve open at 0V or closed?
I'd like to set up my Haltech to feed air to the cat. I know I want to control the split air solenoid valve. Is the valve open at 0V or closed?
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM