Haltech elite 2500?
#4
1262@54psi
iTrader: (7)
I have the elite 2500 in my rx7, Have ran 9.33 at the drag strip with it so far. Chris Ludwig helped me set it up and works great. i converted from the platinum sport over the elite and is for sure quicker to tune and just as user friendly as the sport. The elite has more options than the sport if your looking for more things of the modern day era. Haltech just did a new software update recently and has been working good ever since.
#6
1262@54psi
iTrader: (7)
It works great on street driving no complaints here, drives just like a normal street car around town. I use the quick tune feature on cells when driving around and then just fix the se rounding cells around it and then just let the long term fix up some up too to make it even better. As far as the traction control and knock features I havent used any of those features yet so I can't tell you anything on that but have heard that they work great.
#7
Back in the BOOST Game
iTrader: (15)
Had my car setup by Elite Rotary Shop here in Chicago with the Elite 2500 and as JdmRX states drivability is fantastic. Hands down best ECU i have ever had in the RX and that goes for the PFC and Adaptronic. I have the dual EGTs and dual knock as well as the special Fuel Pressure sensor to ensure the safeties are all enabled properly. I had Elite's tuner Nelson Sevirino execute the tuning, calibrations etc, Still have a bit more work to do as I had a gasket issue on the LIM, but the car makes great power (501RWHP @17.8PSI) with e85 and the flex fuel base map all setup. Essentially this ECU will allow me to drive cross country on pump gas while flexing boost and fuel delivery and then return it to the e85 mode when it detects the proper ethanol percentages.
Over all Great ECU to this point. Expensive, but well worth it.
Over all Great ECU to this point. Expensive, but well worth it.
Thread
Thread Starter
Forum
Replies
Last Post
skorcherbrorx7
New Member RX-7 Technical
2
05-23-16 09:04 PM