RX7 NOOB

The other day I ran the fd on WOT, and I heard a loud ziiiiiiip sound. Now I have no boost, past 3500 rpm I hear a loud whistling sound, ( which I suppose is the turbo whining). After searching I suspect it's the ypipe coupler. I took everything apart and loosened the two clamps on the coupler, and now I can't get the damn thing off. I've pulled and twisted as hard as I can . Has anyone else had this problem? And what else do you think is possibly wrong? Any help is appreciated.

sevensix

iTrader: (1)

loosen some more then join the gym

slayerx7

iTrader: (4)

Up front I should say I have no experience with this problem exactly. But I do have much experiece with things that will just not come apart!

I have a y pipe with a coupler in my garage, and they come apart and back together again no problem.

I would say get some Tri-Flow lubricant, and soak it where they slide together. Pull hard and work it loose. Just be sure theyre stuck because of a tight fit and not because one part is pushing into something else.

skotx

Sounds like it's time for an Efini y-pipe. Can you tell if the coupler is shot? If so, just slice it with a razor blade, as you'll need to replace it anyway.

cewrx7r1

iTrader: (2)

Attack it with sharp and prying instruments!

LOL

RX7 NOOB

Ok, I checked the IC hoses and they look fine. Right now I'm counting on the y-pipe coupler being cracked. The air pump is getting in my way so I've been trying to remove it. Where in the world are the adjusters to loosen the alternator/water pump/ air pump pulley? I think I'm gonna go with the efini y pipe and toss the air pump. PLEASE HELP

dradon03

iTrader: (2)

Easy there desperado.

The adjuster is just under the airpump. First loosen the alternator, drop the belt than start working on your airpump. With 12mm and 14mm sockets and an extension you are pretty well set as well as the 10mm which we all carry around in our pockets.

RX7 NOOB

I removed the air pump and y-pipe and finally got the stupid coupling off. I found a 3/4 inch crack under the bottom clamp, but I think I made it myself by squeezing the thing. Is it possible that it's the turbo control actuator making the problem? How can I tell if it is? I just want to make sure I fixed the leak before I put everything back together.

teddyrx2

iTrader: (33)

cut and replace it

Goukid2

hmmmm may sound weird but im selling my Efini Y pipe for a a stock Y pipe because i just got my hands on a petit Learge Intercooler kit. Are you intrested in the Efini pipe?? Pm me if you are.

RX7 NOOB

anybody

gracer7-rx7

iTrader: (16)

what else do you need? replace the coupler and try it again.

telum01

cut the coupler off and replace it with a silicone coupler. or get an Efini Y-pipe.