3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Starter Relays

Thread Tools
 
Search this Thread
 
Old 04-29-07, 03:53 PM
  #1  
Newbie
Thread Starter
 
CLERMONT's Avatar
 
Join Date: Apr 2007
Location: Orlando, FL
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Starter Relays

where is this located , where can I buy one, Autozone said its not availabel.

My car wont start the iginition works but ther is no power getting to the solenoid on the starter.

I suspect a relay ???
Old 04-29-07, 05:30 PM
  #2  
Rotary Freak

 
mad_7tist's Avatar
 
Join Date: Jan 2004
Location: tampa
Posts: 1,899
Likes: 0
Received 0 Likes on 0 Posts
is it a manual? check the clutch switch. have you checked for power on the starter signal wire?

the anti theft relay is a blue one in the kick panel on the driver's side
Old 04-29-07, 07:47 PM
  #3  
Newbie
Thread Starter
 
CLERMONT's Avatar
 
Join Date: Apr 2007
Location: Orlando, FL
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
I appreciate your answering.

It is a manual

I can turn the starter if if connect the power and the starter signal wire on the starter.

I tested the clutch switch for continuity and it seems to be working.

I also unplugged the connector near the battery that has the other end of the starte solinod wire ( BLACK_redSTRIPE) and if I JUMP THE LEAD STRAIGHT TO THE BATTERY ITturns over.

it seems that the other end of this runs into the Relay Main fuse box so I was suspecting the Relay. MAIN????

I did check the power at the ignition switch and I do get 12v in the start position.

So.....any ideas??? I am suspecting the relay? Does the signal from the ignition go to the relay ?? I can t seem to find a diagram of this?

Could it be this anti-theft relay can I disconnect or work around it?


Is the relay a dealer only item???
Old 04-29-07, 08:15 PM
  #4  
Will work for horsepower

 
Busted7's Avatar
 
Join Date: Mar 2006
Location: Springfield, MO
Posts: 1,865
Likes: 0
Received 1 Like on 1 Post
Go to rotaryheads.com the have the pdfs and the start system diagrams. And it starter cut relay i belive your talking about.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
squirrels
1st Generation Specific (1979-1985)
9
03-22-22 02:23 AM
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
rx7inoregon
Old School and Other Rotary
5
10-01-15 12:44 PM
Devon Murray
Introduce yourself
2
09-25-15 09:41 AM



Quick Reply: Starter Relays



All times are GMT -5. The time now is 03:29 PM.