Idling with half the vacuum after unplugging and re-plugging in the battery harness
#1
Rotary Freak
Thread Starter
Join Date: Jan 2002
Location: Overland Park, KS
Posts: 2,360
Likes: 0
Received 0 Likes
on
0 Posts
Idling with half the vacuum after unplugging and re-plugging in the battery harness
I unplugged the battery harness in order to some touch up painting on the inner finder walls and now i pulled it back in and it is nearly imposiabl to start unless tons of starter fluid is used. The when it does get started i can make it idle around 900rpm but it in only pulling ~200 mmhg. Before I did anything it was running great pulling 430+ mmhg of vacuum but now it it almost running like the engine is blow. I would really think it was blow but since it can idle steady at 900 without dieing that makes me think it is something else.
Any ideas ould be great
Thanks
~Luke
Any ideas ould be great
Thanks
~Luke
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM