I need a new crank angle harness!

Reply Subscribe

Thread Tools

Search this Thread

03-27-04, 01:23 AM

shotcallerx7

Full Member

Thread Starter

Join Date: Mar 2001

Location: Ocala, FL

Posts: 80

Likes: 0

Received 0 Likes on 0 Posts

I need a new crank angle harness!

Were are you supossed to get these things or any factory harness clip for that matter. One of my crank angle sensor, the gray one, has had the wires break off at the harness beyond reliable repair. My water temp sensor harness has seen better days as well. I run a microtech so I'm not interested in a hole engine wiring loom. Any leads would be awesome.
Thanks, Casey

Last edited by shotcallerx7; 03-27-04 at 01:29 AM.

Reply Like

03-27-04, 02:15 AM

books

Rotary Freak

iTrader: (8)

Join Date: Mar 2002

Location: St. Louis

Posts: 1,731

Likes: 2

Received 37 Likes on 30 Posts

Don't know if this will help.. but I have found a few connectors at the local junkyard that I was able to splice into the harness and connect to the CAS(s)...I don't recall exactly which cars I pulled them from...but I believe one was from an MX3