3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help, advice needed please.

Thread Tools
 
Search this Thread
 
Old 02-18-04, 10:33 PM
  #1  
Senior Member

Thread Starter
 
Join Date: Oct 2003
Location: Phila suburbs, PA
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Help, advice needed please.

First off, I don't do any of my own work, so I am really just asking for what may be wrong, not what I need to do to fix my problems--although if simple I would try.
I haven't driven my FD in a week or so. It sits with the kill switch flipped to the killed position after cooling down (Optima dry cell). This morning I flipped it on, cranked the ignition and started the car. It idled normally for a little while. I put the car in reverse and started to back out of my drive. The throttle felt unresponsive (revved but not properly--pushed throttle down but didn't feel right at all) and then the car stalled. Needless to say, the car hasn't started since despite lots of trying. The car cranks and seems to have normal electrical power, it turns over and seems to want to start but then immediately dies. If the ignition is in the on position there is a whirring sound from the throttle body and there is a small amount of white smoke that comes from the exhaust that smells like gas. My question is am I flooded or does this sound like something worse. Do I need to get a tow to KD rotary or is this something my local Mazda dealership should be able to handle (Sussman--they are okay but I rarely trust them with the FD). Anyway, any help or suggestions will be greatly appreciated.
Travis
Old 02-18-04, 10:47 PM
  #2  
FEARED

 
Black97VR4's Avatar
 
Join Date: Mar 2003
Location: Winchester, VA
Posts: 688
Likes: 0
Received 0 Likes on 0 Posts
I'd atleast try to unflood it before spending any money.
Old 02-18-04, 11:11 PM
  #3  
Banned. I got OWNED!!!
 
ZeroBanger's Avatar
 
Join Date: Jun 2002
Location: Buckhead
Posts: 3,323
Likes: 0
Received 0 Likes on 0 Posts
Travis...

I really think you are flooded. I'd floor the gas pedal and try to start and repeat till it starts and let it idle and warm up. Also, I know its cold there, make sure there is no water in the gas.
Old 02-19-04, 09:20 AM
  #4  
Senior Member

Thread Starter
 
Join Date: Oct 2003
Location: Phila suburbs, PA
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Thanks Zero, I tried for a while last night, I will try again today. In case it makes a difference my mods are Power FC, 1300cc secondary rail, hi flo fuel pump, Bonez DP and Hi flo cat, Greddy Power Xtreme exhaust, Greddy air intake and FMIC.
Old 02-19-04, 11:16 AM
  #5  
Rotary Freak

iTrader: (12)
 
moehler's Avatar
 
Join Date: Mar 2003
Location: South Jersey
Posts: 2,319
Received 32 Likes on 27 Posts
if you still can't get it started, go to jpr imports (jim) instead of kdr. he's only 20 minutes outside of philly, and he's MUCH faster thatn kdr. BTW I don't do any major work on my car either, and I've been going to jim for some time now.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
tridav3
3rd Generation Specific (1993-2002)
6
08-17-15 06:32 PM



Quick Reply: Help, advice needed please.



All times are GMT -5. The time now is 10:23 PM.