rx705

iTrader: (2)

http://kgparts.com/forums/tutorials.php?do=view&tutid=2

this is the same fuel system i have ... while im installing my lines, i ran through three lines, one return, one feed, and have no idea what the other line is ? would any one happen to know, and exactly which is 1 is which???

if i have only two fuel lines from the system, which one return and one feed, what do i do with the other line .

Fd3BOOST

iTrader: (7)

The third line is a ventilation breathe. It hooks up to a charcoal canister. I leave mine venting at the fire wall.

rx705

iTrader: (2)

the first line is FEED , and the second one is RETURN, correct ?

jd to rescue

iTrader: (3)

It has been awhile since I looked back their, but basically the line running to the fuel pulsation damper is the feed line, the line coming back from the fuel pressure regulator is the return line, and the remaining line is the vent/charcoal canister line.

jd to rescue

iTrader: (3)

^^See page F-10 of the FSM. The two that are at the same level are the feed and return lines. The one to the front is the feed, the one behind is the return. The one above the other two is the vent.

twisted7

iTrader: (3)

you had it right with the first post. the first line from the firewall out is return, then feed, then charcoal canistor.


the line that is the highest of the three is the feed, the two bottom ones are from firewall return then charcoal.

Hope this helps