any way to plug a pinhole in radiator hose?
#1
any way to plug a pinhole in radiator hose?
i have a small hole in my upper radiator hose and it has developed into a tiny crack about 3mm long. i tried to use some JB kwik on the hole, but it lasted for a while and got brittle and fell off. is there anything i can use to plug this little hole? i cant get a new rad hose for 3-4 days and i have to drive in the heat until then.
Trending Topics
#9
Full Member
Join Date: Apr 2004
Location: Hartford, CT
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
crack an egg open and drop it in the radiator. itll stop the leak once it gets warm... but im pretty sure its not good to have egg in your coolant system. its just an old trick if your coolant system springs a leak and you are sol in the middle of nowhere, you have to keep driving, and you just happen to have an egg on you.
#11
Lives on the Forum
We use some special "tape" on aircraft that would help you, if you could find it at the auto parts store. Basically it's a rubber compound, and when stretched around something it will stick to itself so well that you'll have to cut it off when needed, it will not unwrap again, and will "swell" with the hose. The kinds I've used are orange colored with a small green stripe down the middle, or black stuff with a colored stripe (green, I think), it's about the width of electrical tape, and has a plastic "no-stick" backing that peels off as you're applying it. I've successfully used this stuff for blown radiator hoses in the past, and still keep some in all of my cars for emergencies. Wish I could give you a trade name, but if the auto parts place has it, the counter guy/girl should know what you want by my descriptions I gave if they have it...
If all else fails, clean up the area real good, and fill with black RTV liberally. Let it cure for at least 30 minutes before pressurizing the system. This might not work on the upper or heater hoses, then again, it might for the three days it needs to...
If all else fails, clean up the area real good, and fill with black RTV liberally. Let it cure for at least 30 minutes before pressurizing the system. This might not work on the upper or heater hoses, then again, it might for the three days it needs to...
#15
Go to the auto parts store, get a worm gear hose clamp, and clamp it on over the hole. This held for something like 6 months on my beater/parts hauler. Only reason it's not still holding is because the other hoses sprang leaks, I got sick of it, and replaced all the radiator hoses.
-=Russ=-
-=Russ=-
#17
Lives on the Forum
And, as we all know, it doesn't take much to **** you off, lol...
Hell, even electrical tape will help a little, if it's just for 3 days (wrap it TIGHT)...
Hell, even electrical tape will help a little, if it's just for 3 days (wrap it TIGHT)...
#20
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Originally Posted by Dokta
crack an egg open and drop it in the radiator. itll stop the leak once it gets warm... but im pretty sure its not good to have egg in your coolant system. its just an old trick if your coolant system springs a leak and you are sol in the middle of nowhere, you have to keep driving, and you just happen to have an egg on you.
Worked for MacGyver! I think he used only the whites, though.
#21
i am legendary
Join Date: Sep 2003
Location: Kirkland, WA
Posts: 8,478
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jacobcartmill
um yeah that doesnt work. ask me how i know
#24
i am legendary
Join Date: Sep 2003
Location: Kirkland, WA
Posts: 8,478
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ilike2eatricers
Try some liquid gasket and then wrap it around with duct tape a couple times. I dont see how it couldnt work.