Calling all FC subframe swap guys, wheel question.
12-28-16, 10:30 AM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2015
Location: Long Island
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Calling all FC subframe swap guys, wheel question.
Finishing the swap up with all 89 5 lug components. Question is will a 15x7 w/ 0 offset (4in backspace) fit without sticking out of the fenders? Thanks
12-28-16, 04:26 PM
#3
Old [Sch|F]ool
Probably not. 15x7 on a 25mm offset on the 12A suspension needed a lot of fender rolling for me.
There is absolutely no reason to run wheels with that little offset, strut clearance is fine. 45mm offset 15x6s rub the tires slightly if you are running camber bolts.
There is absolutely no reason to run wheels with that little offset, strut clearance is fine. 45mm offset 15x6s rub the tires slightly if you are running camber bolts.
12-28-16, 05:54 PM
#4
Junior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2015
Location: Long Island
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Figured, was just hoping lol. Was looking at a set of 15x7 +40
