Whats happening it way too quite
 

Just trying resuscitate the forum..has everybody got there Wolf working OK??
No questions for a while....:dunno:

Michael Smith

do you know where I can get a start-up map for a t2? I have a wolf 3d v4.0

Hey joyofcola, If you search for 13BT in this section you should find one or two..I do have a resource page http://wolf3d.dynalias.com I have my own map for a series 4 13BT with 550/1000 cc injectors and Hiflow running 9 psi(standard boost) You should also be able to find a little tool called "Rotary Pulse Recalculator" you can use this the work out injector pulsewidth when changing from one size of Injector to the other. If you still have problems PM me. My map is for a modified V3 CAS...a un modified CAS has different settings.


Cheers
Michael Smith

I was unable to preview the map. Can you email it to me? joyofcola1978@yahoo.com
Thanks

yeah it seems as if Wolf makes to much good of an ecu no one has problems, no timing issues.:lol::lol::lol: thank goodness for WOLF3D i'm loving it :icon_tup:

Michael I also was unable to preview several of the maps on your website.

I have been using your injector pulse program (thanks:icon_tup:). I do have one questions about the program. What does the skip feature represent?

I have yet to try the flogger altough once I get my idle quality issues under control I will.

In any event I never got a shipping map with my computer (now Wolf wants to charge people to stand buy thier product :icon_no2:). I would have liked to see how Wolf sets up the ECU just for references.

anyone with a shipping map send it my way (Please)

this is for a 13bt with 550/1000 injectors 3 inch system..

Skip refers to how often the secondaries fire. If the skip is set to ZERO (0) then it fires twice per revolution once for rotor 1 and then rotor 2 now this can cause some strange things to happen when the duty cycle gets near 6 ms actually about 4.7 in practice. With skip set to one (1) the staged secondaries fire only once per revolution with rotor1, this causes no problems with mixture as the runners are long and rotor 1 and 2 overlap with larger opening times at 6 ms and about 8000 rpm the injectors are at nearly 80% with 100% staging that is the secondaries fire for the same length as the primaries. At 50% staging the secondaries fire for only 50% of the time the primaries pulse length. So if you have 6ms on the primaries and 50% staging the staged injectors are on for 3 ms....or 50% of the primaries..


Cheers
Michael Smith
P.S. what maps didn't open??? I will need to fix them for other to use..

list of non working map (links)



Turbo TII S4/S5
13BT TII S4 Hybrid TO4/S4 TURBO 550/1000cc STARTUP WITH V3 MODIFIED CAS
13BT S5 PLUGIN SHIPPING MAP
13BT S5 PLUGIN 2
13BT S4 ANOTHER MAP
Page header then non working maps below


REW13B Series6
13B-REW Zero Ignition Map (used to check your timing)
13B-REW T04R 3 Bar 850/1600cc
13B-REW Running in Map 4X 850cc
13B-REW plugin running Twins
S6 Plugin Supply map

20B Turbo
20B SHIPPING MAP
20B MAP OF UNKNOWN ORIGIN
20B SECOND MAP




13B-REW T04R 3 Bar 850/1600cc Map 2
13B TT with V4++
13B TT with V4++ 2nd map

BTW thank you for the map & your explanation of skip.

Thanks synergy7 I will have a look at them over the weekend. That's what I call great feedback...I can't look directly into my web server from the internet. I can see them on my network but web servers can be painful some times. I can use a proxy to view them but sometimes it not too hot either.

Thanks Again I will check all those links and pages.:icon_tup:

I am also running great thanks to Wayne, just need to do some cold start tweaking when it gets colder and Im golden.

Could i get a decent running basemap for my t2 with 720cc secondarys instead of the 1000?

Hi Michael, Long time my friend. Sorry for the hijack, but ment to drop by and say hi.

Still with wolf. Doing some V8 tuning myself now. Hope all is well with you guys!

G

no posts for a long time, whats going on?

I need a map for a s4 T2 (stock everything) to start and drive my fb, I have a Wolf 3D v3.1