RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Wolf 3D (https://www.rx7club.com/wolf-3d-125/)
-   -   Wolf 3D Normal noise count? (https://www.rx7club.com/wolf-3d-125/normal-noise-count-753729/)

coxxoc 05-05-08 09:55 AM

Normal noise count?
 
What are you guys seeing as a noise count when the car is running? I get up to 7 (which I think must be horrible). The trigger voltage is set to very low, which I know increases it, but the car doesn't start too well without a low setting.

Josh

coxxoc 05-05-08 10:30 AM

Additional information. It only gets up to 7 when cold and right after starting (idle). Normally it is at 1. Syncx is normally at 1 or 2.

Josh

Michael Smith 05-06-08 06:01 PM

Thats normal to get a few at cranking and starting but after that it shouldn't go up at all.
:)
Cheers
Michael Smith

CrackHeadMel 05-07-08 06:21 PM

you can set it so voltage level is low at first and ramps up over rpm or something to that effect (been to long, i forget)


howlong of a drive does it take you to get 7, i would get alot more than that with my old cas, i swapped out to one that was closer to the fsm's reccomended specs and iirc i only get 1 or 2

coxxoc 05-07-08 08:47 PM

On the dyno this weekend, it was only 0 or 1 when the car is warm. The high count is during cold starts. It seems that is normal per Michael.


All times are GMT -5. The time now is 11:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands