ok so so far what i have gotten is the EMS it self, the PC wires, and the hand controller. the FD being my first project car, and at that it was stripped when i got it, just have to put the pieces together myself. i am quite lost on what to do
engine is on the way so i do not have the engine or the harness from it.
what exactly do i do in order to install this?

 

Do you have a universal or plug and play harness

If its universal, just wire the harness according to the manual, other than that you just have to provide a few switched ignition sources for coils, fuel injectors, fuel pump relay etc

If its plug and play, you need a stock engine harness, and possibly bulkhead harness(s), i am unsure really of exactly what this would entail however, ive never delt with a pnp personaly.


Where does your car sit currently? Does it have any wiring what so ever?

 

in my driveway and it has everything but the engine wiring harness

**edit** what do you mean by universal or plug and play.

 

if someone could put pictures up of their setup i would appreciate that. wires and such.
im guessing i will need to make my own mount

 

well the universal setup has a harness you wiring in, the plug and play just plugs into the factory harness's

i have an FC, and just modified my stock fc ems mount to accept the wolf, fits right under the factory kick pannel

 

i have the plug and play then.

 

just to be sure, can you take a picture of the ems, specificly the side that has the harness plug on it, that will tell for sure

if you deff have a pnp setup, you need a factory engine harness, possibly more, hopfuly someone else can chim in

 

haha yeah hopefuly. ill get some pics up ASAP