Northern California Rotary shop thread
As stated. The old thread is down so i'm making a new one. The only ones I remember were...
Rick's Rotary in Pleasanton - http://www.ricksrotary.com/ PR Motorsports - http://www.prmotorsports.com Forum member Karack - I can't recall if he has a website, but you can search for him. Please post up any Northern California rotary shops that I missed as it's probably a lot. Search keywords: rotary repair shop shops turbo tune rebuild port reman re-manufactured engine Thanks guys! |
My buddy and I do rebuilds from home (we are located in Oakland and I am currently looking for a shop to rent).
Budget rebuilds starting at $1800 short block, New apex seals and O rings. We also offer removal and installs and other mechanical and diagnostic work for rotary powered cars. |
I know he's already been mentioned, but +1 for Karack. My FD's purring like a kitten. :)
|
you wouldnt happen to have the number for his shop would you?
|
I met a guy tonight on highway 9 who says his name is Ivan, he said that he works on rotaries, and is well known in the community, has anyone hear of this guy? Is he legit? I live in the south bay, he said lived in Sunnyvale.
|
i'm around but some delay in getting around to my PM's until i get the shop somewhat cleared out of cars, they keep piling up under my nose..
|
Rotary Evolution!
Originally Posted by Karack
(Post 7417780)
i'm around but some delay in getting around to my PM's until i get the shop somewhat cleared out of cars, they keep piling up under my nose..
I just want to say that Ben (Karack) is a stand-up guy with GREAT work,prices, and customer service! :icon_tup: |
anyone power fc tuners in norcal?
|
Anymore shop???
|
+1 for karack
|
anyone know a repair shop up around chico? itll be nice to know a shop up there to go to or some people since ill be moving there up in the fall.
|
im looking for a shop that will service injectors
|
Originally Posted by xUnKnOwNx
(Post 7485051)
im looking for a shop that will service injectors
|
i need someone to help me take em out, and i heard its alot of work....
|
if u know how to take the uim and stuff off the engine than it would be easy
if not than u might have to bring to some local rotary shop to take it out than send it |
Who can do AC Diagnostic leak work? I got a Leak in the AC system and wanna know where it is....
How much is an A/C Diagnostic? |
Originally Posted by xUnKnOwNx
(Post 7485809)
i need someone to help me take em out, and i heard its alot of work....
I can help take them out for $100 bux at your place if close. PM me
Originally Posted by Deusdeceptor
(Post 7494442)
Who can do AC Diagnostic leak work? I got a Leak in the AC system and wanna know where it is....
How much is an A/C Diagnostic? I just dont Like working on AC systems except for removing them. There could be a few spots you sprung a leak from starting from the most likely to least Front AC condensor located in front of the Water Radiator Remove each line and check the ends for leaks and cracks. Broken or blown O rings Bad compressor ECT. Put some pressure into the system and listen for leaks,this is the first way I would check. |
i am a shop in ukiah that services all rotary powered vehicles with an average of seven a month. i have two third gens and have been doing this for 27 years now. cal licenced auto repair facility called bulldog auto center in ukiah. look me up.
|
Originally Posted by rx7mcd
(Post 7473001)
anyone know a repair shop up around chico? itll be nice to know a shop up there to go to or some people since ill be moving there up in the fall.
|
Originally Posted by Karack
(Post 7417780)
i'm around but some delay in getting around to my PM's until i get the shop somewhat cleared out of cars, they keep piling up under my nose..
Originally Posted by fastlinetuning
i am a shop in ukiah that services all rotary powered vehicles with an average of seven a month. i have two third gens and have been doing this for 27 years now. cal licenced auto repair facility called bulldog auto center in ukiah. look me up.
|
Mind if I add myself to the list?
Details are on my website listed in sig below. |
SOUTH BAY For OEM REPAIR/MAINTENANCE.
Mr. Mazda |
have some spots available, those who needed rebuilds or service drop me a PM. i'll be checking the forums up until christmas.
|
Originally Posted by hyperlitenerd
(Post 7395569)
I met a guy tonight on highway 9 who says his name is Ivan, he said that he works on rotaries, and is well known in the community, has anyone hear of this guy? Is he legit? I live in the south bay, he said lived in Sunnyvale.
|
Originally Posted by fchoncho
(Post 7587196)
Ivan's been around forever and he is well known in the Bay Area. Pretty honest guy that does good quality work. He's the guy with the FD in his living room!!! I sold him one of my S5 TII's a few years back and saw it for myself. Sure enough, under a car cover in the middle of his living room was a FD that still had the new car smell!:rlaugh:
|
Originally Posted by JunpoweR
(Post 7395000)
My buddy and I do rebuilds from home (we are located in Oakland and I am currently looking for a shop to rent).
Budget rebuilds starting at $1800 short block, New apex seals and O rings. We also offer removal and installs and other mechanical and diagnostic work for rotary powered cars. We are in the middle of Bay Area! In Oakland. No need to trailer your cars anywhere. we can call flat bed to pickup your ride. We have a spot or 2 available. We can do anything, including RX-8. We plenty of experience and good references. PM us for questions. |
Originally Posted by petex
(Post 7595835)
Yes, Junpower and I are doing work together.
We are in the middle of Bay Area! In Oakland. No need to trailer your cars anywhere. we can call flat bed to pickup your ride. We have a spot or 2 available. We can do anything, including RX-8. We plenty of experience and good references. PM us for questions. |
|
there a a shop in santa clara off el camino called rotorsport2
|
BullDog Auto Center
I drove my RX3 up to Willits last weekend... Is the rotary scene big at all in your area? ive yet to see a rx3 in person yet. what'd you head up to willits for? the rotary scene is not very strong up here, theres a few around but besides myself and fastline there pretty slim to find anyone that knows anything about what a rotary even is. if you are in the ukiah/willits/mendo county/sonoma/lake county area, Bulldog Auto Center in ukiah. Adam's a easy guy to get along with and knows his sh^t. |
Bulldog Auto Center
Hey, im trading my buddy for his s4 next week.
He overheated it and the motor is toast. I'm not sure if it needs new housings or what but i've been looking for a shop close by and ukiah is really reasonable. I'm pretty new to the 7 scene. I just want to get it running and see what its like to drive it! |
i have more than a few spots opening, the shop will be almost completely empty in a week.
|
Oye Karackk
IF the pos paint shop ever decides to finish my car I have a few things you can do :) Rear urethane bushings, finish up that meth kit, tuning..I think I'm forgetting a few things.. If I only had the money to do a 20B swap on my Z :(.... |
Someone mentioned this already, but I figured I always say this...Rotorsport in Santa Clara. www.rotorsport2.com Paul is the man! lol.
|
im really knew to the rx7 crowd, and i need to get my engine rebuilt and put new seals in it. i live near santa rosa anyone know somewhere that does it cheap im broke? ><
|
Does anybody up here do "comprehensive" rebuilds? THe car I bought was just rebuilt 12k miles ago. All the hard seals should be fine i hope. But the coolant seals are definitely dying. Anybody know of a shop that will replace JUST my coolant seals for me?!??!??
|
Karak, are you still doing rebuilds? If so, how can I reach you, I live in Reno.
|
^Send him a PM. He's still doing it.
|
shout out to karak... hella cool guy and knows his shit... great prices. ill be taking my fd there soon...
|
>< i have tryed to pm him a couple of times but no dice i hope he is still doing it
|
Originally Posted by smog-guy707
(Post 7985696)
shout out to karak... hella cool guy and knows his shit... great prices. ill be taking my fd there soon...
|
i know i am. i have never done it before and it is my first 7 and i dont wanna mess it up
|
Originally Posted by theedn
(Post 8004300)
i know i am. i have never done it before and it is my first 7 and i dont wanna mess it up
|
Junflower!!
You Hole dial8 lol.I am turbo or turbo too! I work on all rebuilds S4-S5-FD mostly.Turbo or non turbo dosent matter. I stopped doing other work and engine swaps. I am open to short/long block rebuilds currently. |
yeah i dont have much of a budget at all lol.. how much do you guys figure it would be for a rebuild....seals and stuff
|
I've been calling around the Bay Area, looking for someone to do the dreaded vacuum hose job for my FD, and everyone I've talked too has pointed me in the direction of rotorsport2.
I talked to PR, Mr.Mazda, Hidden Valley Auto, etc, and they all recommend rotorsport2. I dunno if those guys are any better than the others, but it appears that they've got more patience. for the record. :) |
The other shops can be decent for some stuff but they only like the easy jobs. They want quick turn around and easy money which is why they are just telling you to take it somewhere else.
Yeah, take it to Paul over at Rotorsport. He's done thousands of vacuum lines on FD's so it's nothing he hasn't seen before. He knows what he's doing so no need to worry. |
Karack's mail box is full lol..if you see this karack i was wondering about a rebuild!
|
i will just leave my number since i sometimes take extended breaks from the forum when i'm focusing on getting work done. sorry to those who were trying to reach me. (went from empty to over full in less than a week)
530-701-8488 -Ben |
Damn 500 pms hahhaha popular man!
|
All times are GMT -5. The time now is 12:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands