|
looking tor FD in San diego for M2/Raceshop bar measurement
Hi Guys
since the M2/Raceshop bolt in rollbar has been disconnected and no longer sold and we dont have any good rollbar option for FD... i have a fabricator in San diego thats willing to remake these for us. i need to borrow an FD with no rear interior (prefer beater , track car condition) for some rollbar mock up. In return me and a local shop will start to offer the roll bar again for the FD once it goes into production. price point is going ot be around the same as raceshop around $1200 range or so. We will improve upon the old design where the old sandwhich plate was bit of an weak point. if you could help please let me know any i will put you in contact with the fabricator and in return you will get the first one at heavy discount. Thanks |
Bump!! SOMEONE make this happen!
|
willing to trailer your car to san diego or from la . in return you will get the first one of the bar at our cost! i plan to make 10.
|
Sent a DM
|
Originally Posted by tsmith94FD
(Post 12285151)
Sent a DM
Thank you! i put you in Contact with Mario hopeful we can work something out! btw guys, we plan to revise the design a little by adding an xbar and replacing the oem rear bar |
|
Originally Posted by Narfle
(Post 12286351)
|
The race shop bar is an awesome piece! The problem with reproducing it is the price point. Why do you think Larry doesn't make them anymore? I don't think he was making enough money to be able to continue.
|
Any update on this? |
Getting my FD registered today, then driving to his shop next week and have him take a look, see if mine will work.
|
hi guys
here are some updates and progress. this is just the initial bolt on points, no crossbar or harness bar yet. we should be wrapping this up real soon. i cant wait to get this powder coated and installed on my car. https://cimg4.ibsrv.net/gimg/www.rx7...f09fe33ee5.jpg https://cimg5.ibsrv.net/gimg/www.rx7...9a424131c3.jpg https://cimg6.ibsrv.net/gimg/www.rx7...0d7f166ccb.jpg https://cimg3.ibsrv.net/gimg/www.rx7...af19020c69.jpg https://cimg7.ibsrv.net/gimg/www.rx7...13f99d210f.jpg a final finished product by the same shop that makes the roll bar for the Porsche community. |
He does the S2000 groups rollbars too, said they buy them by the dozen or more...
|
Everyone knows the FD is missing a nice 4 point bolt on bar like the M2/Raceshop bar for the last decades.. we have samberg bar and autopower.. both are not really my cup of tea. Mario from Rogue Motorsport hit me up to produce a Solution for our Rx7 problem. So we introduce the "Rogue Motorsports FD Rollbar"
Roll Bar Features and Highlights *1.75" Tubing with 0,.095 Wall Thickness according to NASA Pro Racing regulation *Dom Mild Steel Construction *Lateral Single Diagonal *Structural X Brace *Build in Harness Bar *Retains full interior (need to remove strut bar cover to install) *retains oem rear strut bar *raw finish so you can powder coat the color of your choice https://cimg9.ibsrv.net/gimg/www.rx7...163890d9a8.jpg https://cimg1.ibsrv.net/gimg/www.rx7...8d648e8772.jpg https://cimg9.ibsrv.net/gimg/www.rx7...163890d9a8.jpg |
What is the timeline for production/availability? Looking for a rollbar currently.
|
Originally Posted by clawhon
(Post 12301844)
What is the timeline for production/availability? Looking for a rollbar currently.
i just purchased the first one |
Nice job, Looks like a high quality bar!
I have some questions for you? How hard is it to take the bar in and out of the car? Does the X- brace get in the way? Did the shock tower interfere with the door jam? When you tighten the main hoop to the floor does it pull the floor pans to it? Or does it pull the main hoop down? leaving an even bigger gap between the the top of the bar and the head liner? Is the driver seat limited to how for back it can go? What about the passenger seat, is it limited more because of the diagonal? Can a 6' tall person still fit in the car? |
Originally Posted by clawhon
(Post 12301844)
What is the timeline for production/availability? Looking for a rollbar currently.
|
Originally Posted by justin samberg
(Post 12302140)
Nice job, Looks like a high quality bar!
I have some questions for you? of course Justin , ill try to answer them to the best of my knowledge How hard is it to take the bar in and out of the car? The bar is a 2 piece design, (main and x brace) its as simple as tilting the main-loop behind the seat and then align the xbrace to the top section of the main loop and strut tower m2 raceshop is like 4- 5 piece if i remember correctly. when i see bolt on cage i prefer the less pieces the better. Does the X- brace get in the way? The x brace does remove some visibility, but thats expected , i will take an picture of what it looks like from my rear view mirror, when its done getting powder coated. Did the shock tower interfere with the door jam? the shock tower clears door jam no issue When you tighten the main hoop to the floor does it pull the floor pans to it? I will check with Mario on this since he installed the bar Or does it pull the main hoop down? I will check with Mario on this since he installed the bar leaving an even bigger gap between the the top of the bar and the head liner? The gap is very minimal , as matter of fact i have all 3 bars installed on different RX7s, Original Raceshop , Your bar and This one by Rogue Motorsport. I will be doing an indepth review later on gap , welds, weight , instal etc next month. Is the driver seat limited to how for back it can go? Im running a bucket seat on my car, but for the mock up the oem seat slides all the way to the back , however reclining at that point is very limited (same with M2/Raceshop) What about the passenger seat, is it limited more because of the diagonal? the passenger wont have as much travel as the driver due to the diagonal bar , (same with M2/Raceshop) im assuming that most rx7 owner that is willing to drill into their floorpan to add an rollbar will be running some sort of racing seat or tracking their car Can a 6' tall person still fit in the car? This question is very vague as i dont really know how to answer it, i've seen some 6' people that cant event fit into the stock fd seat cabin lol. yet some 6' could with more room! bodyshape , torso length, leg length all plays an factor here. but i'm 5'9 on an R1 Chassi with helmet and my recaro bucket seats i have 2-3 inch more gap between my helmet and the roof liner. (my seat can go lower its on the highest setting, as i like to sit higher) also plenty of space from the back of my head and the bar. if you want to see the bar in person i be more then happy to drive to you and show and meet you in person. it n pleasure to meet the pioneer of the v8 swap kit! |
Originally Posted by clawhon
(Post 12301844)
What is the timeline for production/availability? Looking for a rollbar currently.
Group buy link below https://www.rx7club.com/group-buy-ce...p-buy-1130186/ |
|
| All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands