Originally Posted by reactor
(Post 10018074)
Any update for the guys in the first block?
|
If anyone wants their coolers quicker my supplier has Mocal 25 row coolers in stock. Mocal coolers are silver instead of black and have the -10 Male fittings already attached.
|
I talked to setrab today. The deal is, they just ran their stock low on these 25 row cores, and the last shipment from europe came in and was sent out the same day to fill back orders. So everyone is backordered on these cores unfortunately, and the rep at setrab said that they were "caught with their pants down" and they will never run into this problem again (I guess they will be overstocking cores now). So long story short, I hate to tell everyone to wait, but Setrab tells me it will be 3 more weeks before the next shipment arrives from europe, and we are in that shipment. My most sincere apologies on this extended wait. It makes us look bad, but it's a supply problem from the top of setrab directly. Sorry guys, we're doing all we can to speed up the process :(
-heath |
Damn. That sucks. But when it's out of your control, there's nothing you can really do.
This gives me some time to get ahold of some cash! :) |
money sent. did i need to subtract 150 from my total or was that already done?
|
Originally Posted by Kiku
(Post 10023520)
money sent. did i need to subtract 150 from my total or was that already done?
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden"> |
Mocal vs. Setrab
Is there any difference, performance wise, in the two oil coolers? Color doesn't matter to me. I assume they install and fit the same way.
|
Originally Posted by 3rd-Gen-Rcr
(Post 10024889)
Is there any difference, performance wise, in the two oil coolers? Color doesn't matter to me. I assume they install and fit the same way.
-Dan |
Dont want to leave you guys hanging... according to setrab we are still about a week and a half out from receiving the cores. Again sorry for the wait, but it's directly Setrab USA's fault :lol: We will ship your kits the DAY we receive the cores! -Heath
|
Got mine installed, They are great!
The oil temp reaches operating temp much faster then the oem units, takes much longer sitting in traffic for temps to go up and the second you start driving the temps drop very fast! Very pleased. I'm using the 99 spec 25row track kit with the 93 bumper and the oil coolers sit almost directly on the vents! So no need for the ducting. I had to ditch the brake coolers though! I'm not worried cause I bought the 99 spec kit to be used later with an aftermarket bumper. |
Originally Posted by BoostedPenguin
(Post 10042459)
Got mine installed, They are great!
The oil temp reaches operating temp much faster then the oem units, takes much longer sitting in traffic for temps to go up and the second you start driving the temps drop very fast! Very pleased. I'm using the 99 spec 25row track kit with the 93 bumper and the oil coolers sit almost directly on the vents! So no need for the ducting. I had to ditch the brake coolers though! I'm not worried cause I bought the 99 spec kit to be used later with an aftermarket bumper. |
The R1 rx7's came with the R1 lip and additional paneling behind it to direct air to the brakes.
I half expected some of to not fit since I'm using the 99 spec kit track kit on a 93. |
The 25 row oil coolers interfere with the brake ducts??
I thought it wouldn't interfere? Or is it because of the specific 99spec 25 row kit as opposed to the 93 25 row kit??? |
Originally Posted by BoostedPenguin
(Post 10042835)
The R1 rx7's came with the R1 lip and additional paneling behind it to direct air to the brakes.
I half expected some of to not fit since I'm using the 99 spec kit track kit on a 93. |
Looks like I have six 25 row coolers headed my way :)
|
Ok here's an update so everyone is on the same page. Just waiting on Setrab so I can ship the remaining coolers out :)
Block 1 1. proz07, 72023. (Track kit) Shipped 2. BoostedPenguin Shipped 3. krackerx7, 98273. (Street kit, 99-spec) Shipped 4. jmchin, 95032. (Track kit, 99-spec, Nylon lines) Shipped 5. reactor, 98284. (Track Kit, Nylon Lines) Shipped 6. 3rd-Gen-Rcr, 15106. (Track kit, Stainless lines) Shipped 7. Fendamonky, 23517. (Tack kit, Nylon lines) Shipping $20 [Payment sent] Block 2 1. simon sayz, Switzerland. (Track, Nylon Lines) Shipping $87 2. Kiku, Track kit, stainless lines |
Originally Posted by 20bseven
(Post 10051241)
Hey RotorMotor,
can you please sort me out a kit to suit my 20B, engine is mounted on factoy mounts, rebar in front is removed. 99 FD3S. Let me know what other infor you need to mod the kit to suit. Also can you confirm the heat and pressure rating on the nylon lines, my race mechanic seems to think that they dont have a high enough rating for the setup. Also can you price frieght to Bris Australia. Thanks Justin -Heath |
YAY! Can't wait to get the car back on the road.
|
Got it this afternoon. Looks good in the box. Hopefully better on the car.
Thanks guys. |
Originally Posted by 3rd-Gen-Rcr
(Post 10053634)
Got it this afternoon. Looks good in the box. Hopefully better on the car.
Thanks guys. |
Whats the time frame for the remaining coolers? Sorry got a little confused
|
Still waiting on the remaining coolers. I've shipped what I've received. BTW, I got your PM and will be refunding you your overpayment soon :)
|
^ Dood you have the best avatars ever for your name. haha :rofl:
|
Read the instructions first
The only instructions in my kit are for the thermostat installation. Should I have something else in with it? |
Originally Posted by 3rd-Gen-Rcr
(Post 10055572)
Read the instructions first
The only instructions in my kit are for the thermostat installation. Should I have something else in with it? Instructions :) |
All times are GMT -5. The time now is 09:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands