RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   V-8 Powered RX-7's (https://www.rx7club.com/v-8-powered-rx-7s-299/)
-   -   Mufflers for an ls swap? (https://www.rx7club.com/v-8-powered-rx-7s-299/mufflers-ls-swap-1112797/)

Fatpig 04-04-17 10:07 AM

Mufflers for an ls swap?
 
Looking for opinions on the best mufflers to put on an ls swap. big concern is droning and I want it to be a little bit of a sleeper so nothing to loud. I have looked at magnaflow and Gibson but have never used anything but flowmaster. I not in love with that sound anymore, so suggestions are welcome.

Littleguy 04-04-17 01:38 PM

I am using a resonator with a HKS carbon ti and it's not too loud imo.

http://www.newcelica.org/photopost/d...5634564356.jpg

LargeOrangeFont 04-04-17 04:38 PM

Biggest mufflers you can fit. It is pretty much going to drone a little with any performance mufflers. Super Turbo mufflers will likely reduce some drone but will lower the horsepower a bit.

Jager 04-04-17 09:28 PM

2.5" in/out x-pipe = part #10791
2.5" in/out mufflers, 7" round = part #14716 (two of them)
4" tips = part #35136 (two)

I'll see if I can run down pictures.

Quietish at low throttle, screamed at high rpms. Loved this combination.

LargeOrangeFont 04-04-17 10:13 PM

If it is an FC, I used 2 Magnaflow 12644 mufflers. It is quiet for what it is. - Longtube headers, full 3 inch dual exhaust with custom X pipe.

3inch in/out, 6 inch round 18 inch long body 24 inch overall mufflers.

If you are going for quiet and less drone, do not put on bigger tips, they will make the exhaust louder.

Fatpig 04-05-17 03:10 PM

great input. Littleguy nice looking fd, is the difuser a bolt on part or is it custom. I was going to cut the spare tire well and install one on my fc.

I am getting pretty pumped about the ls swap into my fc sounds like the cars are a blast.

ZoomZoom 04-05-17 09:21 PM

Dude the import exhaust cans sound great honestly.
It's what I ran and loved it.

misterstyx69 04-06-17 01:48 AM

FC..I used the Racing Beat Turbo mufflers and had the mid pipe fabbed to the Headers on a 302.

Littleguy 04-06-17 05:33 PM


Originally Posted by Fatpig (Post 12170991)
great input. Littleguy nice looking fd, is the difuser a bolt on part or is it custom. I was going to cut the spare tire well and install one on my fc.

I am getting pretty pumped about the ls swap into my fc sounds like the cars are a blast.

Thanks, the diffuser is from Shine auto and it bolted right on, they have some options for the FC.

FC3S RX-7 Spec-RE Full Aero | Shine Auto Project

One piece of advice I would give if you are going to do a diffuser for sure is to put on the diffuser first and then do the exhaust second. The diffuser will pretty much dictate what exit path the exhaust can take.

Like ZoomZoom said, the fart cans sound good on our cars, I had a racing beat on mine and I thought it was too quiet, imho. I think there is a 100% chance of you having a blast with the car, they are super duper fun and you will love owning one.

ITSWILL 08-10-17 07:39 PM

I know its been a few months since the last post here but I use the REV2 racing beat mufflers and they sound great, quiet when cruising and get loud when you get on it. Also they don't look ricery and fit perfect.

Mr3plus1 08-21-17 08:32 PM

1 Attachment(s)
Tanabe exhaust. Really subtle and no ricer look from behind.

Attachment 751131

Mikelivi91 08-22-17 06:15 AM

Borla ProXS here. 3.5" all the way back but surprisingly quite at idle and low RPM for a Sport/Performance muffler.


All times are GMT -5. The time now is 05:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands