i cant find my coolant temp sensor wire
Thread Starter
Can Post Only in New Member Section
Joined: Apr 2015
Posts: 1
Likes: 0
From: ontario
i cant find my coolant temp sensor wire
hello guys..anyone cant send me a electrical drawing, I cant find my coolant temp sensor wire after I reinstalled a fresh built engine...I figure if I know pich pin it is I would splice into there and run a new wire to the senor
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
You need to list the CAR that you have in order to get specific answers.
Also IF you decide to use the Coolant temp circuit then you most likely would use the SAME sensor that the OLD engine came with.
So using the Rotary engine coolant sensor on say a V8 would have to be addressed.
The threads are different by the way on the sensor.
Also IF you decide to use the Coolant temp circuit then you most likely would use the SAME sensor that the OLD engine came with.
So using the Rotary engine coolant sensor on say a V8 would have to be addressed.
The threads are different by the way on the sensor.
You need to list the CAR that you have in order to get specific answers.
Also IF you decide to use the Coolant temp circuit then you most likely would use the SAME sensor that the OLD engine came with.
So using the Rotary engine coolant sensor on say a V8 would have to be addressed.
The threads are different by the way on the sensor.
Also IF you decide to use the Coolant temp circuit then you most likely would use the SAME sensor that the OLD engine came with.
So using the Rotary engine coolant sensor on say a V8 would have to be addressed.
The threads are different by the way on the sensor.
