RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Time Slips and Dyno (https://www.rx7club.com/time-slips-dyno-128/)
-   -   WTF? 14.6 @ 96mph (https://www.rx7club.com/time-slips-dyno-128/wtf-14-6-%40-96mph-451014/)

CyborgRyu 08-06-05 11:00 PM

WTF? 14.6 @ 96mph
 
https://www.rx7club.com/showthread.php?t=435084


I purchased this car and only thing I have done is correct the vaccuum lines alittle(still a leak some where).

Given that I do suck at launching this car. I haven't got a real chance to learn it yet; it only boost up to 8psi; even then the car shouldn't be that slow. My old s4 T2 had a s5 turbo and manifold, CS Exhaust and presilencer, FCD, walbro 255 ran a 13.88.

This car is Street ported, bnr stage 1, 3rd gen fuel, 2.5" dp, apexi n1 exhaust, vaccuum leak, greddy 2 row fmic and it feels sluggish.

on the upside, I can drift this mofo like no other.

adrock3217 08-06-05 11:57 PM

Fix the vaccum leak, and learn to launch the car :)

josh greene 08-07-05 11:32 PM

also the 2.5" DP it sounds crazy but I noticed a huge dif between the 2.5" and 3" DP also does it have bigger scondarys.....that could be a problem as well.

CyborgRyu 08-08-05 10:48 AM

720 secondaries.

I couldn't imagine a vaccuum leak and 8psi could still make my car that slow.

josh greene 08-08-05 11:18 AM

thats what I was boosting 8PSI on stock turbo and 2.5" exhaust then I upgraded to a 3" got a MBC and was running 12PSI, till the other night when I blew my 147,000 mile stock turbo.........now im going s5 turbo.
I was very suprised at the change from 2.5" DP to a 3".

J-Rat 08-08-05 12:40 PM

8 PSI isnt all that much, considering it took me 17 PSI to hit 12s.

13bpower 08-08-05 02:43 PM

You should be alot faster. My stock turbo, stock IC, T2 trapped 98.5 at 7psi.

sleeperfc 08-08-05 04:20 PM

you people dont make sense to me.

fix your car, run 13 or 14psi and be happy. 8 psi on that turbo is nothing. why upgrade turbos and only run 8psi?

CyborgRyu 08-08-05 05:57 PM


Originally Posted by sleeperfc
you people dont make sense to me.

fix your car, run 13 or 14psi and be happy. 8 psi on that turbo is nothing. why upgrade turbos and only run 8psi?


well i can't boost past 8, the car won't let me because of the vaccuum leak.

sleeperfc 08-08-05 07:51 PM


Originally Posted by CyborgRyu
well i can't boost past 8, the car won't let me because of the vaccuum leak.


i listed what you need to do in order...

fix yor car....

boost more....


you shouldnt be out racing with a bad vaccume leak.

CyborgRyu 08-08-05 08:23 PM

easier said than done....i wish i know where its coming from.

myR1 08-08-05 08:46 PM

If you are wanting some help looking for the leak I'd be happy to help. I'm a little busy normally but I'm sure I can make some time to look at it. It sounds like the turbo is a little big to only be running 8 psi which is likely the cause of your disapointment.

Brian (norythme on CicyRx)

CyborgRyu 08-08-05 10:23 PM

bnr is not too big.

jacobcartmill 08-09-05 12:32 AM

i ran a 13.2 on 11psi.

jack_arss 08-09-05 12:48 AM

back in the day I trapped 102 with an stock port s4 jspec, stock turbo/ic, stock catback, 2.5" down pipe, running 11psi:)

unless your car is running 100% dont take it to the track, because you'll only let your self down, not to mention you join the "woulda-shoulda-coulda" crowd.

CyborgRyu 08-09-05 10:43 AM

jacob....buddy ole' pal. I should come down to louisville. Give me a hand ? :)

I don't know where to locate my vaccuum leak or have the tool to do so.

sleeperfc 08-09-05 02:38 PM

the tool is a can of carb cleaner...


All times are GMT -5. The time now is 01:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands