RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Time Slips and Dyno (https://www.rx7club.com/time-slips-dyno-128/)
-   -   New ET, 11.116 *vid* (https://www.rx7club.com/time-slips-dyno-128/new-et-11-116-%2Avid%2A-598048/)

J-Rat 11-23-06 09:57 PM


Originally Posted by No_Rotor_RX7
I uploaded it to streetfire here:

http://videos.streetfire.net/video/2...8200e59cf0.htm


hope ya don't mind Jrat!!! i had it saved from when i watched it the first time.

Not at all! Thanks!!!

J-Rat 11-23-06 09:58 PM

Streetfire it is...!

http://videos.streetfire.net/video/8...820122da2a.htm

arghx 11-23-06 11:50 PM

3000 lbs is portly. My T2 is 2780 with a full tank of gas... that's with a front mount, power steering but no A/C, and a roll bar inside.

So wait did you completely not even get into 4th or just mis-shift and have to force it in? Because I'd find it surprising that your 3rd gear can do 125 or whatever. What size wheels do you have?

Sideways7 11-24-06 05:03 AM

I think his slicks were a good bit larger than stock, but I could be wrong.

Twofer 11-24-06 05:39 AM

Very nice. The machine gun fire exhaust cracks me up. That's got to scare the shit out of people.

rx7jocke 11-24-06 07:53 AM

is that some special kind of 2-step.... i am thinking about activate the 2-step funktion on my E6K....would it be the same?

J-Rat 11-24-06 11:29 AM


Originally Posted by arghx
3000 lbs is portly. My T2 is 2780 with a full tank of gas... that's with a front mount, power steering but no A/C, and a roll bar inside.

So wait did you completely not even get into 4th or just mis-shift and have to force it in? Because I'd find it surprising that your 3rd gear can do 125 or whatever. What size wheels do you have?


The only run that I even used 4th was the last one. I missed it, let the car idle down, got it into 4th, then mashed it.. by the time the car re-spooled, I crossed the traps.

J-Rat 11-24-06 11:30 AM


Originally Posted by rx7jocke
is that some special kind of 2-step.... i am thinking about activate the 2-step funktion on my E6K....would it be the same?


Yep, thats an E6K also, and thats just the 2-step thats provided with the K.

No_Rotor_RX7 11-24-06 12:50 PM

the reason he trapped so high without 4th gear is due to a little thing called... momentum :) when you start getting some real power this tends to follow with it haha.

tearbo2 11-24-06 04:10 PM

:smiley309




nice run jrat

rx7jocke 11-24-06 04:17 PM


Originally Posted by J-Rat
Yep, thats an E6K also, and thats just the 2-step thats provided with the K.

yipppiiiiiiieee

No_Rotor_RX7 11-25-06 04:32 AM

so what turbo you gonna step up to.... T66 maybe? :D :D :D

rx7jocke 11-25-06 05:47 AM

Greddy td06-25G.. thinking about a holset hx40
Or was i me that you ask?

Sideways7 11-27-06 05:41 PM


Originally Posted by No_Rotor_RX7
the reason he trapped so high without 4th gear is due to a little thing called... momentum :) when you start getting some real power this tends to follow with it haha.

Yes, but with the stick tire size you max out well before 125 in 3rd. If I remember right its more like 100.

No_Rotor_RX7 11-27-06 10:56 PM

yes, if you hold it at "x" rpm in "x" gear then that remains true. when you start getting up around and over 400rwhp the car will pull so hard thru the gears that as you are shifting the momentum is still pushing you up in mph.

coltboostin 11-27-06 11:19 PM


Originally Posted by No_Rotor_RX7
yes, if you hold it at "x" rpm in "x" gear then that remains true. when you start getting up around and over 400rwhp the car will pull so hard thru the gears that as you are shifting the momentum is still pushing you up in mph.


How much MPH do you estimate you gained while "coasting"?

I dont want to start an arguement-but I have not experienced this in any car or bike I have pioleted down the track- From my 150mph trapping car- to 170mph Turbo Busas.

J-Rat 11-28-06 08:24 AM

On the 124 MPH pass, I mis shifted 4th.. tried to get it back into fourth, and finally had to lift the pedal and let the car idle down.. Finally GOT it into forth, and had enough time to respool the turbo before I crossed the traps. You draw whatever conclusions you want.

coltboostin 11-28-06 09:22 AM


Originally Posted by J-Rat
. Finally GOT it into forth, and had enough time to respool the turbo before I crossed the traps.

That makes more sense- When you said momentum before-that suggested the car was in neutral and actually using momentum and just coasting down the track. The car as you state was obviously under its own power, and accelerating through the traps-momentum was not involved.
Do you plan on installing another Tii trans-rebuilding yours-aftermarket box?

J-Rat 11-28-06 09:25 AM

I dont think it was the transmissions fault, I think I was just out of practice..

:)

coltboostin 11-28-06 09:28 AM

Thats what I like to hear.

J-Rat 11-28-06 10:35 AM

You act like I am a newbie or something.. Ive been dragging for over 16 years.. I know when the shifting is the car or when its me just being too exciteable... Sometimes, no matter how long you have been racing, the adrenaline still makes you a little too jumpy....

Whizbang 11-28-06 10:39 AM

i think he meant that in hopes the TII trans is holding up.

coltboostin 11-28-06 12:02 PM


Originally Posted by Low Impedance
i think he meant that in hopes the TII trans is holding up.


Exataly-since I will be running the same trans-just throwing a bit more power at it. Its good to see it holding up to at least some abuse.

Sorry for the conussion Rat.

J-Rat 11-28-06 12:04 PM

Okay, my bad... Guess I am still jumpy...

Yeah, I will be upping the power to 550 or so in the next few weeks, and I DONT expect the tranny to have many issues with that. BUT, we will see!!

Whizbang 11-28-06 12:09 PM

curious, are you using a sprung or un-spung clutch?


All times are GMT -5. The time now is 09:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands