Dyno question
So last weekend I went to a dyno day with my fc. When the guy was setting it up he hooked up the ignition pickup to the trailing number 1 wire. Shouldn't it have been hooked up to the leading ignition wire? At the top end of my dyno sheet it got a bit wavy but I don't have any misfires and my afrs are good. I was wondering if it was because of the hookup or I have other issues.
|
Nevermind the ignition pick up... It is supposed to be on the trailing coil. I will upload my dyno sheets later if someone can give me some pointers on why my curve got wavy closer to peak. Thanks.
|
you can do either but the settings have to be changed on the ignition angle since the leading is waste spark and fires twice as often as the trailing. i find the trailing ignition signal is weaker than the leading so often i choose to use the leading signals and place the pickup near the plug and not the coil.
lead angle is 180* trailing angle is 360* |
All times are GMT -5. The time now is 09:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands