13.657 @ 104
 

stock turbo
fmic
street tyres
98 octane pump fuel

60' :2.190
330' :5.905
660' :8.896

this was my 4th run of 5, too many cars to get a decent amount of runs in

How much boost?

Rotary >Pistons

12 psi at 3600rpm
buy I'm using 2 step so I'm building 3psi off the line

what's ecu are you running to provide you with the 2 step

Rotary >Pistons

microtech lt 10

13.84 @ 102 Mild streetport, Racing beat full exhaust. Nothing else.

That's a fast time for your power/boost.

I hope you have a fcd if you're running higher than stock boost.

Have you dynoed it

Rotary >Pistons

He's running a Microtech. Standalone.

Seems like standalone is the way to go but I really can't afford it.

I'm hoping to get at least 200-250whp out of the stock ecu/fuel system/turbo with a fcd.

I've got a 3" turboback exhaust, is an s4

I'm going to get an rtek if possible.

Rotary >Pistons

Don't get a FCD it's just a band-aid. Get atleast a rtek

If I can't get a rtek I need at least a fcd.

Running the 3" exhaust is going to bring up the boost, I do plan on porting the wastegate and using a stock intake to reduce the amount it goes up.

Rotary >Pistons

it's got 216whp. I just ran a 13.57 @ 103.4 on wed night.

Must be fast

Rotary >Pistons

the stock injectors can support the mid point of your whp goal safely. however, w/the FCD, 9 psi boost is max if you want the engine to survive. along w/your setup expect the lower range of your goal. is wise to spend the little extra on at least the Rtek7 v 1.5.

9psi it is then it less! I have a 3" exhaust so I'll need to figure out how to restrict the boost down to 9 psi or lower.

Was going to port waste gate and use stock intake if that'll do it.

Edit - I think the car may have a fcd installed already. Its a black box near the boost sensor. I'll take a pic

Rotary >Pistons

Rising rate FPR works well too.

Cool set up :icon_tup:.

I remember back in the early and mid 1990'2 cars had to have at least 350 hp to run in the 13's.

Good time... Still amazes me how quick these cars are without much power. Weight and rwd will do that I guess! I'm coming from FWD's

Rx7s are boss that's why

Rotary >Pistons

too right they are. I just dicovered that I did my last run of 13.57 at only 9psi as my boost controller was at its low setting lol