RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Time Slips and Dyno (https://www.rx7club.com/time-slips-dyno-128/)
-   -   12.3 1/4 mile stock turbo (https://www.rx7club.com/time-slips-dyno-128/12-3-1-4-mile-stock-turbo-1031295/)

MaczPayne 09-06-13 06:13 PM

Nice run, man!

wthdidusay82 09-07-13 09:02 PM


Originally Posted by fcrotory (Post 11566684)
S4 t2 motor with 9.4:1 rotors.
E6k
550/1600 injectors
S5 turbo @10psi
3" dp to straight thru exhaust

nice , probably making decent power, I'm on stock 8.5:1 , 550/720, s5 Turbo , rtek 1.7, 2.5" Turbo back

antman0408 09-11-13 04:18 PM


Originally Posted by fcrotory (Post 11562152)
So i ran at the strip friday night in my drift car. I too am on a stock turbo at 10psi. Tires were 225/45/17s.
My best time was 13.4@104.8mph. I had horrible 60ft' times. Over 2 sec every time lol. But i can see hitting 12s all day with drags tires. Was fun though.

That's a pretty good time, with some practice and higher boost pressure you could get into the 12s. Getting below 2.0 for a 60' on street tires is not easy to do. Took me a while to figure out how to get the best launch, and only got a few 1.9x 60' times and a bunch of 2.0x. With the drag tires, my first time out I was getting 1.7s, and with harder launches I'm getting 1.6s. Going to try launching with the 2step now, hoping for 1.5s.

fcrotory 09-11-13 07:28 PM

Thanks. Ya, this was my first time on the strip with this setup. I have stupid stiff coilovers so its hard to get a good squat or weight transfer. Slippin the clutch was almost mandatory. I was just messin around with a few drift friends. But boy did it feel awesome to beat 2 sti's, a evo 8, and a bunch of Hondas and some other v8 junk. My car was tuned at a conservative 240hp@10psi. My wastegate rod feel off during tuning and had no clue till i got home. After fixing that and a few small things. It could have a few more hp. Or at least more tq. Idk. It was all for fun though. But it made me wanna build a drag car though$$$ lol

wthdidusay82 09-12-13 12:55 PM

You have no problems with boost creep running the 3" turboback?

fcrotory 09-12-13 05:29 PM

Ive never seen it go above 10lbs. I ported my wastegate though.

wthdidusay82 09-12-13 09:34 PM

I've ported mine as well.

Any manual boost controller?

fcrotory 09-13-13 12:44 AM

Ya, just a cheap eBay mbc.

wthdidusay82 09-13-13 03:53 PM

Cool , I haven't bought a manual boost controller yet I'm waiting to see where my boost is first.

antman0408 09-13-13 10:17 PM

wthdidusay82, take your conversation to pm's

Tntslikiss 09-30-13 02:20 PM

Nice run...quick for stock turbo and sounds beastly!


All times are GMT -5. The time now is 02:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands