Another RPF1 FD fitment question.
Sorry for asking this probably for the millionth time, I did search but want to confirm what I've found before dropping nearly $2,200. Based upon this thread (https://www.rx7club.com/suspension-w...s-help-991326/) and in particular the pictures from jasonn, are 17x9.5 +38mm RPF1s with 255/40/17s all around still accepted to fit an otherwise completely stock FD with NO rubbing at all? They look perfect based upon the pictures he's shown and he reported zero rub even during track days. Can anyone else confirm this is good to go? Also, would this offset limit my brake upgrade options in the future? Not looking to do anything too crazy, just curious. Thanks in advance for any help you all can offer!
|
|
rears should be fine
fronts... you definitely need to roll the fenders. The frequency of rubbing will probably vary by your roads and how steep your driveways are, ride height etc. I get some rubbing on my 17x9 +45 setup up front - usually on big dips in the canyons or turning up steep driveways. |
Reviving this since I still haven't gotten around to purchasing this combo yet but realize I made a mistake/misquoted the actual setup I was looking to do in my first post. Here's Jason94R2's original post and I essentially am looking to mimic the same exact combo (wheel and tire sizes/offsets) assuming they won't rub:
Originally Posted by Jason94R2
(Post 11476960)
9" and 45mm front with 255/40 tires, 9.5" and 38mm out back on 275's. Ideal fitment imo if you still plan to run a streetable suspension and not rub.
https://cimg6.ibsrv.net/gimg/www.rx7...791a8dc1ec.jpg Jason
Originally Posted by Jason94R2
(Post 11522279)
Raced the FD this past week, road course and auto-x. No rubbing on unrolled fenders despite HARD use.
https://cimg9.ibsrv.net/gimg/www.rx7...6e9b0ba104.jpg Shows the rears tucking nicely w/o rub. https://cimg1.ibsrv.net/gimg/www.rx7...a0a4b86e31.jpg And the fronts w/o rubbing. https://cimg2.ibsrv.net/gimg/www.rx7...82764fc8f9.jpg https://cimg5.ibsrv.net/gimg/www.rx7...d22338778b.jpg I figure this is the most tire you can get under the FD f/r with RPF1 wheels with untouched fenders and stock splash guards. I'm running 2* camber up front and 1.5* out back, stock bars f/r. Jason |
Originally Posted by NightWalker86
(Post 12532979)
Is the consensus still that this is a good setup for an otherwise stock suspension without needing to roll anything?
|
All times are GMT -5. The time now is 11:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands