1st gen suspension measurements for autocross
 

I have a 85 gslse with the respeed front coil over kit with tokico lum on front and rear with ground control rear springs caster camber plates on the front respeed bbk and running 245/45 16 what is a good start on caster camber and toe measurements any help would be awesome thanks a lot

depends, maybe like -2.5 camber, max caster (isn't going to be much, 4-5), and start at zero toe, and tune from there. most people need more camber, but they also run narrower tires. toe could go either way, although i suspect an auto-x car will want a little toe out.

the ride height should be even, or maybe a little higher in the front. the front roll center moves with ride height, and the rear doesn't.

Thanks