RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   What kind of HP can I expect???? (https://www.rx7club.com/single-turbo-rx-7s-23/what-kind-hp-can-i-expect-637017/)

OzzManG149 03-28-07 02:57 AM

What kind of HP can I expect????
 
What kind of Horse power can I expect with the following mods to my FD? I know this question has been asked but im trying to get an idea before I get my car back from being rebuilt.

Greedy T-78 Turbo
1600cc Injectors
Apex-I Power Commander and FC
TurboXS Type-H BOV
Greedy Profec B-spec Boost controller
Apex Front mount intercooler
Bonex 6 disk performance clutch
Efini Y-pipe
Fluidyne Radiator
Jacob’s FC1000 ProPak Ignition
Mazda Speed Short Shift Kit
RP competition fuel pump
Apexi 3 Bar Map Sensor

rexhvn 03-28-07 07:34 AM

How much PSI?

Cgotto6 03-28-07 09:43 AM

Haha, so your telling me you have an efni Y pipe, and a T-78? I gotta see this.

Roto7FD 03-28-07 10:39 AM

450 @ 15lbs. on pump maybe. You have stock ports?

zinx 03-28-07 11:19 AM


Originally Posted by Roto7FD
450 @ 15lbs. on pump maybe. You have stock ports?

Probably closer to 400 @15, maybe even as low as 380-390.

OzzManG149 03-28-07 12:17 PM


Originally Posted by Cgotto6
Haha, so your telling me you have an efni Y pipe, and a T-78? I gotta see this.

I can scan a copy of the reciept from rx7.com if you like.

the guy I bought the car off of said that with the 3 bar map sensor and race gas i should get arounf 500 rwhp. It also has a streetport from RX7.com

http://img142.imageshack.us/img142/7009/rx71za0.jpg

OzzManG149 03-28-07 12:20 PM


Originally Posted by rexhvn
How much PSI?

the last time it was tuned it was at 15 PSI. Witht he 3 bar sensor should e able to increase the boost abit right?

dubulup 03-28-07 01:03 PM


Originally Posted by OzzManG149
I can scan a copy of the reciept from rx7.com if you like.

you bought a pipe for twins and you run a single. If you have the reciept, try to get a refund.

dregg100 03-28-07 02:01 PM

efini y pipe. hahahaha. you deffinately need to try to return that bad boy, or you could give it to me. oh and your map sensor doesnt give you more power FYI.

OzzManG149 03-28-07 02:14 PM

the reciept shows the it was installed before the single turbo set up my apoligies. I quess my main question should have been how much diffrence will the 3 bar map sensor make. It was dynoed the first time at 411 rwhp on race gas w/o the 3 bar map sensor.

crazyrx7 03-28-07 06:21 PM

All the 3 bar map sensor will do is you can run more than 17psi of boost (the factory map sensor maxes out at 17psi). I think if you turn it up to say...24 psi then I can see 500rwhp on pump gas.

R.K.

OzzManG149 03-28-07 07:16 PM

I was also told to never run it on pump gas past 10 psi. If goig to high boost on the boost controler i should run race gas ms109 or vp c12. I would think that the 3 bar map sensor does allow you more power due to the fact you can up your boost. I knew that the map sensor itself doesnt give you more power. Sorry I was vague on the question. Thanks Guys. Im learning... lol

crazyrx7 03-28-07 08:18 PM

Some guys run up to 20 psi on pump gas. It all depends on the tune.

R.K.

dregg100 03-28-07 08:48 PM

16 is max safe boost on pump. (IMO) get AI and u will be set for a decent amount of boost.

crazyrx7 03-28-07 10:26 PM


Originally Posted by dregg100
16 is max safe boost on pump. (IMO) get AI and u will be set for a decent amount of boost.


I concure. I myself am only running 15 psi on pump gas. If I get meth injection and a 3 bar map sensor I might turn up the boost but for now 402rwhp is plenty.

R.K.


All times are GMT -5. The time now is 12:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands