Which wastegate and blow off's for a S475 pp motor?
Trying to get some input on a wastegate and blow off or 2 for a PP S475 turbo motor. I have the lt10 4 bar set up. I wil also be running alcohol. Any help is appreciated!! Thanks!:)
|
haha i think we have a very similar build in common :)
you should make a build thread so i can see this monster i mean, im using twin tial 44mm wastegates, and a tial 50mm bov along with the turbos anti-surge is plenty. that should be plently to control that setup. |
Would dual 38mm wastegates and dual 38mm blow offs work? I can find 38mm wastegates all day for $100 or less. This car was intended to be a street car but I guess, it has spun out of control.:icon_no2:
|
I'm not sure, but if anybody knows if they will, then i might just go with them as well. Tial parts are expensive!!
|
Craigslist, I've seen quite a few for sale $100 and under. Check it out. Your in Miami? Im coming down to see Mike Turbo in 2 weeks.
|
I'm in fort Lauderdale.
but mabey we could talk while your down here? |
Guys, what about those ebay wastegates?? Anyone have experience with them???
|
http://cgi.ebay.com/ebaymotors/60MM-...Q5fAccessories
This 60mm wastegate is only $85, how bad could it be?? |
i actualy ran one of thoes with my stock port cosmo and a t04s. it worked perfectly? i sold it with the setup but if funds are tight when i put the mani together im going to run one again
|
would (2) 60mm wastegates be too much?
|
i tried one of the ebay special(60mm) on a customer's car. it worked fine until exhaust gas started to go through the valve stem and burnt out the diaphram. i replaced it with a different wastegate(jgst). my cousin also has one of the 60mm on his car, his car is a daily driver so i'm gonna see how long it lasts. for a race application it might last we'll also see.
|
From the looks of this pic it look like ken runs it on his carand as we know he run really high horse power!
http://www.tunerzine.com/coverage/32...ay_3rd_120.jpg |
is it really worth it? consider how much money you have invested in the entire setup. do you want to risk destroying it all just to save a few hundred?
|
Originally Posted by killahrx7
(Post 9213062)
i tried one of the ebay special(60mm) on a customer's car. it worked fine until exhaust gas started to go through the valve stem and burnt out the diaphram. i replaced it with a different wastegate(jgst). my cousin also has one of the 60mm on his car, his car is a daily driver so i'm gonna see how long it lasts. for a race application it might last we'll also see.
|
All times are GMT -5. The time now is 04:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands