It'll be fun
|
1 Attachment(s)
Fro, how come your To4Z doesn't have to holes drilled into the compressor inlet cover?
|
Originally Posted by 88fc3sw/HX83
Fro, how come your To4Z doesn't have to holes drilled into the compressor inlet cover?
It broadens map at expense of spool time. We have OEM Garrett TO4Zeeee's :) |
reduces spool time? i heard it increased spool time (made it laggier) but has the anti-surge or whatever now.
also makes a crazy super turbo spool sound, new and improved. how much are your garrett t04z's running you guys? |
The z is thrust iirc. The benfits of this is higher cooling efficiency.
|
Rice when searching on this a bit I spent some time talking to a good friend yesterday. If the part numbers are correct he said the one thing he noticed with putting this cartridge in back to back on the dyno was cooler EGT's and boost went up a bit. He was a little confused because the part numbers didn't match, but the moment I described the turbine wheel he knew immediately. It's also not listed as a P-trim wheel.
|
1 Attachment(s)
Originally Posted by fro
Hi Mark :)
You don't happen to have the dyno sheet from your old car do you? Planning on more boost on the T04Z in the new car? ;) Yep planning on 1.5BAR :MissileSm lol |
i got the hks z and it's crazy, spool very quick but i havnt tune my car yet since the new turbo. but at the moment a show close by telling me it feel like 400hp n i m at 10psi. i did got my car tune by Ken b4 with my t04r
|
Originally Posted by Zero R
Rice when searching on this a bit I spent some time talking to a good friend yesterday. If the part numbers are correct he said the one thing he noticed with putting this cartridge in back to back on the dyno was cooler EGT's and boost went up a bit. He was a little confused because the part numbers didn't match, but the moment I described the turbine wheel he knew immediately. It's also not listed as a P-trim wheel.
I am pulling engine this week, will be full street ported running 2mm 2 piece ceramic seals with WI too, Hopefully punch out some real good number on 1.7 ~ 1.9bar boost. |
Originally Posted by RICE RACING
Great stuff :)
I am pulling engine this week, will be full street ported running 2mm 2 piece ceramic seals with WI too, Hopefully punch out some real good number on 1.7 ~ 1.9bar boost. |
Originally Posted by Mr rx-7 tt
What are you using for springs with the 2mm ceramics? I though NRS was out?
|
So what RPM would a aggressive street port with the T04Z be looking at 1 Bar with a 1.00 .vs. 1.15 A/R?
|
All times are GMT -5. The time now is 12:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands