Single Turbo?
 

I don't know if anyone ever asked this question, but I am running a non sequential setup and I am loving it. The only thing that I miss is always being able to hear my bov. I only hear the full woosh sound from the bov when I am under full boost. Before when I was setup sequential, I would here the bov just from pressure built up under vacuum. I would like to basically be able to hear my bov just from reving the engine. I know it sounds stupid, but I miss the sound. I remember cruising around and each time I shifted I got to hear the woosh sound. So, my question is, what would be a good single turbo to get, that would build up enough pressure at low rpm's to allow me to hear my bov again. Any suggestions would be helpful.

Thanks.

Adjust your BOV.

Adjusting it won't fix my problem. The pressure build up is not the same anymore once I went non sequential.

BB 57 trim To4E with a .84 or 1.0 t4 turbine housing...

At what rpm's would I see the boost start to spool up?

Precision 6262 or GT35R.


BOVs dont work off pressure from the turbo, they are pulled open by manifold vacuum.

With that turbo? In the low 3k range.