RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   rx7 fd single turbo setup question (https://www.rx7club.com/single-turbo-rx-7s-23/rx7-fd-single-turbo-setup-question-822075/)

Initial_fd3s 02-23-09 11:08 PM

rx7 fd single turbo setup question
 
Hey guys, I'm thinking about running a single turbo t04s(non ball bearing) on my fd with greddy m spec intercooler, power fc, greddy profec b 2 boost controller without a street port or anything but just keeping it low boost what do you guys think? will it damage my car?

GoodfellaFD3S 02-23-09 11:20 PM

Damaged as in, you're parked in the parking lot at the supermarket and a shopping cart smashes into your FD?

Not sure what you're asking.

Upgrade your fuel system, and get the car worked on and tuned by a rotary (and FD) specialist.

thewird 02-23-09 11:25 PM

If anything it would extend the life of your engine since you remove the twin heat generators.

thewird

Initial_fd3s 02-24-09 12:02 AM

Yah i'll defenetly get a good tuner but the install of the single turbo and intercooler seems like any good mechanic can do. And i meant damaged as in ruin my engine, you know blow my apex seals, and the m spec intercooler not being effecient enough for the T04s. Since many people usually do street ports, or rebuilds on the engines before installing a single turbo i was just woundering would it be bad just installing it with intercooler, power fc, boost controller with the engine as is and keeping it at low boost?

thewird 02-24-09 12:06 AM

Street port just gives you more power, you don't necessarily need it. As for any mechanic doing the swap, its not that simple since you have to block off a lot of things and remove some. Single turbo won't make you pop a seal, a bad tune or mechanic will.

Where abouts in Ontario are yah, I do tuning :)

thewird

Initial_fd3s 02-24-09 02:47 PM

Awsome ! and i see you live in toronto? i'm from Ottawa. Maybe i'll come bring my car to you, Do you tune Power Fc? how much do you charge? fill me in lol

thewird 02-24-09 03:23 PM

PM'd yah since I don't think it belongs in this section/thread.

thewird

VICEdOUT 11-10-12 02:01 PM

Maybe someone can state all the block off plates needed for the single turbo swap, I'm sure it will help out a few members.. :lol:

XLR8 11-10-12 04:01 PM


Originally Posted by VICEdOUT (Post 11282604)
Maybe someone can state all the block off plates needed for the single turbo swap, I'm sure it will help out a few members.. :lol:

All those few members need to do is search..... It's been done, to say the least.

FD3s RX-7 Block Off Plates
Banzai Racing FD Block-Off Plates Location

VICEdOUT 11-11-12 10:20 AM

There is also this kit on ebay:

RX7 RX 7 FD3S FD EGR Block Off Plates Plate Turbo | eBay


All times are GMT -5. The time now is 02:15 AM.


© 2024 MH Sub I, LLC dba Internet Brands