KKK K27-7200 Turbo - 14psi
Standard port 13b on 98octane with compression in the high 4s
Aem WI
550/1650s
pfc and map
400hp and 365lbft

In for a rebuild now so will update in due course.

Deleted

Same old set up..
BW 362 sxe 1.0 ar ceramic coated
very old long run turblown mani
dual open waste gates
Primary injectors 1000 ID
Secondary injectors 2000ID
FFE fuel rails
walbro 450 fuel pump
Excessive LIM ceramic coated
OMp deleted( pre-mixing)
93 octane (pump gas only)
393 whp on Dyno Dynamics Dyno @
13 psi
ETS 4" intercooler set up as V-mount
fluidyne rad.
hks twin power.
10 and 9 spark plug heat temp
3" exahust
https://cimg9.ibsrv.net/gimg/www.rx7...518d8c4ea1.png

https://cimg3.ibsrv.net/gimg/www.rx7...035e9be94.jpeg
https://cimg7.ibsrv.net/gimg/www.rx7...78036b6b6.jpeg

Nice.. I gave up on my 8 long time ago cause its weight,.
that swap looks very nice and clean.
congrats..
What do you plan to do with it? Track, DD, or what?

Rx8 rew swap
 

Fds engine
cosmo intake
street port job
sxe 362 .88 turbine housing
rx8 stock R3 transmisión
12 psi soon dyno
haltech re500

https://cimg3.ibsrv.net/gimg/www.rx7...261e765e3.jpeg

Car: 1997 RZ
Turbo: T04S
RWHP: 288HP
ECU: PFC

1999 Fd3s Rs
Efr 8374
14/15 psi
xcessive lim
turbosmart internal gate
391 whp
Haltech 1500

Currently on stock coil packs
and stock primaries.
https://cimg1.ibsrv.net/gimg/www.rx7...5bb959b90.jpeg

Beautiful setup bud!

What intercooler set up is that? New radiator and air conditioner core required with it? Looks very tidy.

Thnx guys 👍🏽
Greddy V mount kit
factory AC components

Off subget
 

How is that rx8 transmission holding up with that setup?

asking the question was likely the feather that broke the weak camel’s back :suspect:

Engine - Large street port, studded and balanced with RA super seals - 8000 rpm max rev limit.
Turbo - Garrett TO4Z 1.00 AR
Power - 390 bhp at flywheel
Boost - 0.7 bar of boost
WMI - No
Torque - 316 lb ft at flywheel
Weather conditions - Wet
Gearbox - Oem 5 speed manual
Final drive - 4.44
Wheels and Tyres - Advan RG2 17 x 9 All round. Michelin Pilot Sport 4 with 245 40 17s all around.

Only mapped on low boost at 0.7 bar running 390 bhp and 316 lb ft at the flywheel.
In a few weeks with water injection it will be mapped to 1.2 bar and hopefully make close to 500 bhp.

https://cimg2.ibsrv.net/gimg/www.rx7...243de29244.jpg
Made 390 bhp and 316 lb ft at the flywheel
https://cimg3.ibsrv.net/gimg/www.rx7...3bda044f46.jpg
60-100mph in 4.46s (wet conditions)
https://cimg4.ibsrv.net/gimg/www.rx7...e856dbd8ec.jpg
60-130mph in 10.55s (wet conditions)