RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   Need help for my single Fd. 1.5 or 2.0 WAY lsd (https://www.rx7club.com/single-turbo-rx-7s-23/need-help-my-single-fd-1-5-2-0-way-lsd-898485/)

13bmaniac 04-16-10 03:32 PM

Need help for my single Fd. 1.5 or 2.0 WAY lsd
 
Hello guys i have been running the car lately in streets and i have go to the drag

strip 2 times. the car was tuned with the gt42 and pulls 619 hp, it doesnt matter

in what gear im running when i press full trotle the tires burn after i have traction,

i was wondering if a good LSD from kaaz or carbonetics will help me with this.

also i dont know wich one to choose if a 1.5 way or a 2 way.

ill apreciate the helps and comments´....

WaachBack 04-16-10 11:19 PM

I have a Kaaz 1.5 way and love it. No problems at all.

siguy2k 04-17-10 04:21 PM

1.5 will only lock up under acceleration, 2 way will lock under accel/ or decel, more for drifting. And sounds like you need suspension and tires to help you, not a diff.

13bmaniac 04-20-10 03:03 PM


Originally Posted by siguy2k (Post 9939481)
1.5 will only lock up under acceleration, 2 way will lock under accel/ or decel, more for drifting. And sounds like you need suspension and tires to help you, not a diff.


already have 275-35 drag radials, tein flex- complete superpro bushing kit, maybe ill take the carbonetics 1.5 lsd.......

rxspeed7 04-20-10 09:04 PM

yea a two will sound and somewhat feel like a welded diff. you'll prob want to get a 1.5 if you going to drive it often on the streets. 2 ways can get very annoying driving them on the street

thewird 04-20-10 11:19 PM

1.5 way = mostly everything
2 way = drifting

thewird

zinx 04-21-10 04:09 PM

Loosen that suspension up to make it set the weight on the rear wheels.

SmogSUX 04-21-10 04:47 PM

Touching up on what everyone else says:

Loosen up the rear suspension-since you have coilovers I'd loosen them up all the way, maybe check to see if your springs are preloaded at all.

If you're having any wheel hop look into a pinion snubber.

With that much HP you're still going to have a little wheel spin with drag radials, maybe you should look into full slicks?

Diff can help a little.

13bmaniac 04-22-10 12:37 AM

thanks for the tips guys, i know the flex is not maybe the most accurate choice for drag racing but i choose the tein flex for been very good for the street nd circuit sometimes.... i iwll loose her in the rear to se what happens, i willorder the kaaz or the crbonetic unit this week...

thanks


All times are GMT -5. The time now is 11:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands