Max boost and power from a stock engine
I know this may have been done to death but I need to know what are the possibilities of pushing more power out of a stock 87 TurboII with out major mods. (Ie, new turbo, intercooler, maybe injectors etc.)
Situation: Car has 117k Still runs strong (Dynoed at 157whp) Have HKS FCON Still running stock Injectors, Want 200 at wheel hp Max boost from stock turbo and intercooler setup We figure in installing some instumentation such as a more acturate boost guage and a airfuel meter to tell us how this will work. The FCON was the real key to this mess but your opinions if 200 at wheel is possible with these conditions or with minor mods? |
I have a 3rd gen not a second, but a few friends have 2nd gen turbo II's I think with a downpipe, midpipe, and a good cat back exhuast. along with around 9psi of boost should get you what your looking for.
Maybe some of the turbo II people can better explain this than me. Keisuke |
I agree with MAKO, you need to let it breath. Work the exhaust area but get a Air/Fuel meter just to keep track of the mixture. https://www.rx7club.com/ubb/cwmsmilies/cwm1.gif
|
I forgot to mention that the exhaust was the first thing to go in the car. It was completly rusted through because of the heat shielding. We did not use a aftermarket but had a good muffler shop replace everything from cat down and kept it a twin pipe configuration. Because of that we hit the boost cut. Because we were hitting the boost limit so a fuel defenser is in there right now.
|
Originally Posted by Takahashi Ryosuke
I know this may have been done to death but I need to know what are the possibilities of pushing more power out of a stock 87 TurboII with out major mods. (Ie, new turbo, intercooler, maybe injectors etc.)
Situation: Car has 117k Still runs strong (Dynoed at 157whp) Have HKS FCON Still running stock Injectors, Want 200 at wheel hp Max boost from stock turbo and intercooler setup We figure in installing some instumentation such as a more acturate boost guage and a airfuel meter to tell us how this will work. The FCON was the real key to this mess but your opinions if 200 at wheel is possible with these conditions or with minor mods? |
|
Hella zombie.
|
Downpipe and midpipe will help gain power as well plus gain PSI.. so get a downpipe midpipe, and short ram with K&N filter. maby a cheaper FMIC... new plug wires maby.
$2500 but it also offers 400 total horse power. |
Full 3" exhaust and intake, ported WG, FCD, 720cc secondary injectors, Walbro 255 fuel-pump and a basic piggy-back to control the fuel will get you around 220whp+ and will put you into the 13's at around 10psi.
So yeah, there's plenty of room for improvement using the stock turbo and IC. I ran a 13.6 at 106mph using the stock turbo and IC. That's with a 2.4 60' time as well. :) |
All times are GMT -5. The time now is 01:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands