internal wastegate source
i have had no luck in the 2nd gen forum...maybe here?
have found a few nice t3/to4e turbos for my Turbo II but they all do not come with the internal wastegate or the actuator. I am sure I can use my actuator but I dont think that the wastegate set up would fit. Any other second gen owners out there that had the same problem but then found a source/solution? |
just so we are both clear....
the t3 hotside of a t3/to4 has a 5 bolt pattern to accept a wastegate flapper valve and exhaust flange assembly. i suggest you purchase it with your turbo as you will need such an assembly to complete the backside of your turbo. the item generally is a garrett casting others make such a unit (turbonetics) BUT there is more than one 5 bolt pattern... for instance the mercedes diesel casting has a different bolt pattern. make sure you find one that will fit your 5 bolt pattern. as to actuator... it depends on how handy you are. the stock mazda fd actuator is an excellent piece. it has an approx 9 pound spring. with a bit of light welding or fabrication it can easily be adapted to your turbo. good luck, howard coleman |
1 Attachment(s)
well....yes the hotside has a 5 bolt pattern with three for the exhaust...no one seems to sell the comlete turbo..justthe turbo without the flapper and exhaust flnage asssemlby..liek in the pic
|
i deal w Majestic turbo waco texas. email kevin draper who is the key guy. they are very reasonable pricewise, racers, and do good work. he is very familiar w what you are looking for and can do alot of nice mods for you.... like machining 4 ounces of the turbine wheel nut and putting a bullet on the compressor wheel.
kturbo@majesticturbo.com will reach him. howard coleman |
All times are GMT -5. The time now is 09:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands