Holset Part Number...
I've been searching for part numbers or serial numbers on Holset turbo's, HX40's...but so far, I've not come up with number that a cummins distributor is happy with!
I've got contacts through Cummins because I work in the marine industry but the numbers I've given them so far, they keep asking me for engine numbers because there are variations on the part numbers I gave them! What I'm looking for is... HX40 19cm housing 4" exhaust T4 4" inlet v-band (if possible) or... any similar set-ups you have in HX40. Am looking for about 400-500Hp, thats what the car is set-up to support... |
a little progress..
ok, I've been in touch with a Holset distributor, this might be a bit premature, but he is looking into turbo's for me, to try and match my information I gave him, to a turbo they produce...
Here is what I've asked for: HX40 Compressor housing - MWE Intake, size 4" Compressor wheel - 7 blade wheel T4 divided 19cm exhaust housing No wastegate Oil cooled Also asked for versions in a billet compressor wheel and standard wheel... Will let you know what he comes back with. |
Originally Posted by orange
(Post 10375745)
I've been searching for part numbers or serial numbers on Holset turbo's, HX40's...but so far, I've not come up with number that a cummins distributor is happy with!
I've got contacts through Cummins because I work in the marine industry but the numbers I've given them so far, they keep asking me for engine numbers because there are variations on the part numbers I gave them! What I'm looking for is... HX40 19cm housing 4" exhaust T4 4" inlet v-band (if possible) or... any similar set-ups you have in HX40. Am looking for about 400-500Hp, thats what the car is set-up to support... That's the exact turbo I have. 4" inlet, 4" outlet. 19 cm^2 hotside with no wastegate. I got it from http://www.goldfarb-associates.com/goldfarb_site.htm It was completely rebuilt and rebalanced if it is going to a "stock" application, but w/e. It looked new when I got it and it hasn't failed yet :D I paid $536 USD shipped. Only trouble is the best you can do is ask for him to keep an eye out for that specific turbo. |
My friend brought up puting a hx35 on his talon last weekend, here's some info to try(quite abit tho).
http://www.dsmtuners.com/forums/turb...read-only.html http://www.holset.co.uk/Turboeuropa/...%20program.php And one narrowed down to the HX40's http://www.holset.co.uk/Turboeuropa/...=&holsetturbo= Hpe this may help. |
Originally Posted by 13b-series
(Post 10378937)
My friend brought up puting a hx35 on his talon last weekend, here's some info to try(quite abit tho).
http://www.dsmtuners.com/forums/turb...read-only.html http://www.holset.co.uk/Turboeuropa/...%20program.php And one narrowed down to the HX40's http://www.holset.co.uk/Turboeuropa/...=&holsetturbo= Hpe this may help. |
feedback
I've had some response from the Holset dealer, he is happy with the information I've given him, but still needs more data, he is asking for the size of the inducer and exducer for the compressor and the turbine wheel!
Any ideas on that? What I've got from the other forums I've is... 60mm Inducer / 85mm Exducer 76mm inducer / 64mm exducer So what I'm thinking is to go with the 60mm/85mm, and see what they come back with! |
or we've got smaller inducer's 50mm, 52mm, 54mm, 56mm...
From there I could work out the best combination to get me my A/R figure I'm wanting. |
All times are GMT -5. The time now is 05:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands