RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   high idle... (https://www.rx7club.com/single-turbo-rx-7s-23/high-idle-829330/)

tatu2183 03-29-09 03:52 PM

high idle...
 
i have a 91 rx7...i just swap motors and put a tII in...i have taken all emissions and blocked off every thing...i havent had the car tuned yet but it idles at abt 2000 rpms....high...and if its cold the rpms will surge...it bounces from 1500 to 2000 rpms...any suggestion how to fix or does it just need tuned....

tatu2183 03-29-09 04:01 PM

my spec...
t4 turbo
external wastegate
power fc
hks evc
hsk turbo timer
aeromotive fuel reg
255lph fuel pump
720 cc primary
1600 cc secondary
all emmisions gone
everything bocked off
kgparts fuel rail
custom catch can
...think that everything

85FBSPEED 03-29-09 04:10 PM

try to tune it and see what happens

siguy2k 03-29-09 07:51 PM

Still have a BAC? Thats what controls idle. If it doesnt have that then you need to adjust your throttle plates.

kenn_chan 03-29-09 08:43 PM

Maybe a vacume leak....try useing a spray bottle to squirt water around the various block off plates, vacume hoses and gaskets between the manifold. when it stumbles you have found your leak.

kenn

tatu2183 04-06-09 09:43 AM

ok..thanx...i did spray starter fliud around the block off plates...but not the exhaust manifold

arghx 04-06-09 10:35 AM

what exactly did you modify on your throttlebody? If you removed the coolant hose, did you remove the thermowax/fast idle cam? If you don't, the idle will stick high.

kenn_chan 04-06-09 06:18 PM


Originally Posted by tatu2183 (Post 9104163)
ok..thanx...i did spray starter fliud around the block off plates...but not the exhaust manifold

no mang, just the intake manifold, and any block off plates/vacume hose that are left. also check the area around the intake manifold to keg gaskets, sometimes they leak there.

kenn

tatu2183 04-12-09 05:46 PM

one thing i foregot to add...i put a jacobs fc1000 igintion on there to...im not for sure if its programmable...could that be the problem...


All times are GMT -5. The time now is 06:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands