Originally Posted by blmcquig
(Post 10312956)
this might be a stupid question....
the only difference between the GT35R and GTX35R is the compressor wheel, correct? so the compressor cover, back plate, chra, turbine, turbine housing is all the same? so, effectively, i could just get a 35R, and at a later point if i decided, a gtx wheel could simply be put in, and i would have a gtx35r?
Originally Posted by Zero R
(Post 10313135)
Garrett wont sell just the wheel. I did get pricing on these as of yesterday when it was finalized. I won't post any pricing up but if interested PM me and I will get you a price.
~S~ If so, is it possible to make a GTX3574R? |
Not possible. Garrett wont sell the comp wheel by itself.
~S~ |
Originally Posted by MOBEONER
(Post 10312148)
GTX3582R will be $2179 ??????????? I can deal with out the X thank you.
|
Originally Posted by Turblown
(Post 10315074)
We will be selling them A LOT cheaper than this.. We've got several on order...
|
These will be out in about 4 weeks. Pricing will probably be around $1900 for the GTX35R. We will also sell them without the turbine housing. Price on that will be around $1550.
|
1 Attachment(s)
We've got the smaller GTX3071R(s) shouldn't be long before we've got the GTX35R(s)....
|
So is the hotside on the gtx30 still to restrictive?
|
Not for 300whp ;)
|
Oh man, don't know anymore, looking for about 350whp on a t3 manifold,stock ports and best suited to run at the nürburgring
|
Originally Posted by KrisD1
(Post 10343805)
Oh man, don't know anymore, looking for about 350whp on a t3 manifold,stock ports and best suited to run at the nürburgring
StageV 57Trim To4E with a T3 turbine housing, BB or journal GT35R in a T3 turbine housing StageV will respond a little faster, but gt35R will provide more power if you want it down the road... I would not run the GT30 series on a 2 rotor. |
ok, thanks. Now I know what to ask Santa :-)
Have to keep up with my pall and his clk black edition so I think 350whp should do it. |
Originally Posted by KrisD1
(Post 10343766)
So is the hotside on the gtx30 still to restrictive?
Originally Posted by KrisD1
(Post 10343826)
ok, thanks. Now I know what to ask Santa :-)
Have to keep up with my pall and his clk black edition so I think 350whp should do it. |
We just got our shipment of gtx35Rs. Pixs coming soon...
|
1 Attachment(s)
In stock ready to ship!
|
delicious!
|
Yes very.
|
Can't wait!!!!! ......:scared:
|
Heard from a friend today that C.Dyson tested one of these turbos , said they were worth every cent, bulk HP increase ( claimed 80hp+ ) exact same setup as a GT just retuned.
Haven't confirmed this but sure there will be more info floating around soon. |
Anyone tried one on a rotary yet?
|
Anyone running these yet?
|
1 Attachment(s)
Started doing custom anti-surge housings as Garrett is now releasing just the carts instead of complete turbo less turbine housing...
Back in stock again, finally :icon_tup: |
someone riding one ya? I'm interested to see how it goes, since I have thought;
gtx3582r t4 0.84 ar turbine v-band tial double watesgate recirculated to 44mm downpipe etc etc to see that gives results! regards --------------------------------------------------------------------------------------------------------------- alguien a montado alguno ya¿? estoy interesado en ver como va, puesto tengo pensado; gtx3582r turbina ar 0,84 t4 v-band doble watesgate tial 44mm recirculadas a downpipe etc etc a ver que resultados da!!! saludos |
All times are GMT -5. The time now is 03:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands