Garrett M12 & M24 turbo identification W/ measurments
I have a set of turbos that I'm curious to know exactly what they are. There rebuilt, I've had them for 2 years and never used them for anything. They are both externally waste gate, both A/R .60 cold side & .81 on the hot side.
Measurement for the internals are as follows: 1st turbo has a Garrett & Allied signal tag. Also looks to have water freeze plugs? P/N ZGM0003 S/N 466324-9002 Hot-side: Wheel - 2.891 in or 73.43mm Hub - 2.917 or 74.09mm ( If a hub is what it's considered) Where the NUT is tightened - .858 in or 21.80mm Coldside- Wheel - 2.951 in or 74.95mm Flange that goes into the actual housing - 5.494 in or 139.55mm Where nut is tightened - .685 or 17.40mm Markings Noted: on the Cold-side wheel- 786 & paint stamped RO 56 Second turbo W/ no tag: Hot-side: Wheel - 2.880 in or 73.15mm Hub - 2.912 in or 73.96mm Nut - .865 in or 21.97mm Cold-side: Wheel - 2.940 in or 74.68mm Flange - 5.490 in or 139.44mm Nut - .690 in or 17.52mm Noted markings on cold-side: On the wheel - 0 & A on opposite sides & 786 cast in tho the wheel. Ink stamp says : BAL 7 Back side stamped on the Cold-side - M9 & A Any info would be nice. I'm pretty sure they are T4 flanges as well. |
All times are GMT -5. The time now is 10:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands