Front housing oil feed to turbo: Thread size?
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2001
Location: MI 48111
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
Front housing oil feed to turbo: Thread size?
I need to run my oil supply back to the banjo fitting on the front housing. Not sure if I want another banjo type fitting or adapter to AN. Anyway, what size and pitch on that fitting? 1988 if it matters. Thanks.
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Earl's 9919BFH is a 14mm 1.5 pitch male to -4AN male adapter.
It can be used to attach an oil line directly to either the front side housing where the Mazda banjo bolt is, or to the end of the stock Mazda oil line.
It can do both because the 14mm male end also contains a female tapered compression fitting like the stock Mazda line from the turbo.
It can be used to attach an oil line directly to either the front side housing where the Mazda banjo bolt is, or to the end of the stock Mazda oil line.
It can do both because the 14mm male end also contains a female tapered compression fitting like the stock Mazda line from the turbo.