Finally installed T51R KAI
 

Now off to the dyno.:)

wow..looks good. how much boost you gonna be running and what kind of numbers are you shooting for? also will that smic be able to handle a turbo that size well?

i would use a front mount with a big turbo like that, thats just me though. looks good, i hope you get the numbers your looking for. if you find out that it isnt a big enough intercooler and want cooler intake temps, you could possibly use a water injection system. much cheaper then converting to front mount

ABS gone or just painted black??

is this the HKS kit or on some sort of custom manifold?

how do you like the sound :)

It is a kit. I only race the car now, so I am thinking the smic will work for short bursts down the track. I hope to achieve around 500 rwhp at 20+ psi. A fmic in in the plans though. Along with back halfing the car.

Ray Wilson ran the same type of setup making around 650whp with the same intercooler. You should be fine.

Bring it up to the meet this sunday outside DC.

more pics?

Anyone happen to have a good map for PFC to start with?

I'll email you one if you me your address.

What kind of IC is that in the pic...?

I emailed you the maps.

Pettit large.

What mods are you running? Fuel and such. I see your fpr, are you running a cosmo/supra pump, parallel pumps, etc.

I am running all bolt ons, pineapple large port, 850 1600 injectors, and using a walbro on the stock circut, and stock pump directly hooked to battery with switch and fuse. I only need to run the stock pump at the track.

you should run both fuel pumps all the time as the larger volume diffrence will cause your fuel pressure to rise some and cause tunning issues and it's safer to have all the fuel you need all the time so you don't make that mistake of accidently forgetting to switch on the extra pump and pooof!... :D

looks good and you can never have too much fuel

Thanks guys. Lots of hard work right there, let's not mention money.

No need, people have put out over 600 rwhp on similar setups.
Looks like a sick setup! When are you get some dyno numbers? Be sure to update us on what kind of numbers it puts down! :D

I am now installing a haltech. I met the end of the PFC.

if that motor had a small streetport and a one cat, will it ever pass smog?? i think it can if you lower the boost to 4-6psi. i am getting the same setup soon and would like to know how the turbo is and how laggy it is.


oh, and about the smog, i live in california

I could have sworn I have video of Rays car at the track and him adding Ice to the Liquid to Air IC.

Great rule of thumb..... If you have to ask how laggy it is, single turbo probably isnt for you. My t78 spools around 3500-4000

Well tried to dyno it, but the PFC isn't working out for me. Boostin right off the scale. Was able to make 435 rwhp at 6200. Installing haltech as we speak. Should be looking around 530 to 550 rwhp.

You can add a 3 bar map and change the setting so it will read it. I did.