Efr turbo on greddy log manifold fitment question
Hey guys I'm been planning for a while to upgrade my turbo on my fc. I'm been watching those turblown kit for quite some time now but I have a greddy kit already, budget and the fact of getting rig of a working system just make me think about this. I'm just wondering if anyone have use a greddy log style manifold with a efr turbo and how the fitment on it? Thanks
Eddie |
Seems like you could do better by selling the Greddy kit as a complete kit and then being able to afford another manifold.
If you just sell the Greddy turbo and lines the buyer is going to have to source a Greddy manifold for the FC. Not an easy proposition. ___________________ On my FC I used an FD HKS T04Z SS manifold I found cheap with my EFR 7670. It looks like it would fit the EFR 8374 (larger compressor housing). I did a dual WG conversion, but if I would have kept the single WG I would only have had to cut/re-weld the WG pipe a bit to make the WG fit more toward the transmission instead of the subframe (and you would have to trim the emissions stuff off of your lower intake manifold). |
i never intend to sell the turbo at all, is either i sell the hole kit or just swap the turbo and DP
|
If you can fit an S300(s360, s363, s366 ) or GT40R on the FC cast manifold then the bigger EWG EFR units should fit. The smaller 7670 will definitely clear.
|
All times are GMT -5. The time now is 12:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands