Thanks to everyone for the support!
The slip joint is a burns double slip and the turbo also has a brace on it. So I dont think that it will be a problem. We put it there for the header to have room to grow. |
Damn, the set up looks awesome. I wish I could get a ride in your car.
|
Maybe you can if I get a chance to goto a cars and coffee meet out your way when the car is done.
Believe it or not, it is getting really close. The big thing left after we get all the fab done is the body work. |
Me too, I want a ride..lol...
Can't wait to see it done Jon, I will be down there in March hopefully I get to see it then. |
Originally Posted by ruos
(Post 7512743)
TwinsTurbo,
congratulations to you and Jack for the record breaking lap. I assume a similar manifold was running on that car? http://www.youtube.com/watch?v=dK_UxfmX8L4 https://www.rx7club.com/attachment.p...7&d=1185571042 ^wowow! craziest thing I've seen in awhile. |
are bungie cords the new zip tie? haha
|
Originally Posted by ruos
(Post 7512743)
TwinsTurbo,
congratulations to you and Jack for the record breaking lap. I assume a similar manifold was running on that car? http://www.youtube.com/watch?v=dK_UxfmX8L4 Gotta love the gearing of that car!!! spool? what spool its on boost none stop!:) :icon_tup: :icon_tup: :icon_tup: :icon_tup: :icon_tup: :icon_tup: |
Nice hood!
Originally Posted by infinit1
(Post 7059849)
These are pics of the car that has the S366 on it.
The filter will be routed under the passenger headlight. It is tight but it will fit. Are you going to round out the edges, or cover the opening with a grille? |
The more I see this, the more I want one.
|
Which hood are you talking about? the black car or the red one?
The one on the black car came from extreme dimensions. |
Where is the wastegate dump pipe going? any pics on that?
I want to know where is the safest place to route the wastegate dump pipe if its vented to atmosphere |
Waste gate is going to dump under car to the ground near the tranny.
|
Any update's Jon?
|
Not yet. Just waiting for powder coating and anodizing.
|
Can't wait for updates, this looks like an amazing WIP! :) :lol:
|
sweet build!
|
5 Attachment(s)
New pics! Just the piping for the exhaust and make an intake is left for the fabrication. after that it is wiring and tuning!
|
5 Attachment(s)
more pics
|
4 Attachment(s)
couple more
|
And sheet metal ducting!
|
very sick!
what are you doing about braking system? no abs? ... |
nice update Jon, car is carzy...
|
No abs. But gonna upgrade soon. Probably AP Brakes.
|
Originally Posted by infinit1
(Post 7742178)
No abs. But gonna upgrade soon. Probably AP Brakes.
|
what is the runner length on the exhaust mani, are they equal length? I know that 18-24 inches is ideal.
|
From what I remember it is somewhere around 24" and pretty close to equal length.
|
I know this is an old post but how's everything going with the car? I was also wondering how much the turbo set up cost because the place I had at ripped me off and now I need to go for a new set up.
|
It is actually getting wired up right now and after that it is tuning and body work. If you need someone to give you some kind of pricing you can call the twins or goto their site.
www.twinsturbo.com |
It is actually getting wired up right now and after that it is tuning and body work. If you need someone to give you some kind of pricing you can call the twins or goto their site.
www.twinsturbo.com |
Any Updates?
Please do tell... :) Chris |
infinit1, any updates. I've been dying to find out how your set up is running. I know the Twins Turbos guys are badasses, I've seen their twin turbo set up. They sure do things different from other fabricators.
|
Originally Posted by RacerXtreme7
(Post 7054891)
Excellently fabricated!!
I'm a little perplexed as to why you went through all the trouble fabricating these manifolds without a little research done first. Perhaps you just decided to be different? I'll clarify, the exhaust manifold, why not go with the tried true proven to spool quicker AND make more power fully divided manifold? Also, bends within 3" of the turbine entrance can hurt some of the dynamics within the turbine also. ~Mike................ I really don't know so I'm asking this seriously, Who knows maybe it's a new idea. |
How much for the old exhaust manifold
|
If there is a more street friendly version of this available, and by street friendly. i mean maybe a full 4 in exhaust. so you can have some type of normal street exhaust ie. Greddy, Blitz and the like. I'm down for this.
|
1 Attachment(s)
This is not a kit and I dont know if they will ever make it into a kit. The car is on hold as I started a new Biz and have no time to work on the car. But just for those who didnt get to see this book(This
is from the book "Street rotary" page 144). |
damn
|
Originally Posted by infinit1
(Post 9426840)
This is not a kit and I dont know if they will ever make it into a kit. The car is on hold as I started a new Biz and have no time to work on the car. But just for those who didnt get to see this book(This
is from the book "Street rotary" page 144). |
|
Congrats on it at least making some noise under it's own power! Can't wait to see some videos of it driving in anger.
|
|
hur dur look at me I wear my hat back to front while I tune cars :lol:
Haha in all seriousness nice setup! |
Finally got to lay into a little
Had more in it but I had no reason to go any further. |
|
very clean! nice build
|
love twins turbo stuff. Excellent builds as always!
|
Nice videos. I've been staring at Jack's set up (his car is collecting dust at RRR Motorsports) every time I'm there following up on the progress of my car. The guy has so many cars, a few weeks ago, he didn't even notice he still has a Porsche in his garage :). Wonder if he'll sell his set up :)
|
Originally Posted by spiritrmazda
(Post 11377508)
Nice videos. I've been staring at Jack's set up (his car is collecting dust at RRR Motorsports) every time I'm there following up on the progress of my car. The guy has so many cars, a few weeks ago, he didn't even notice he still has a Porsche in his garage :). Wonder if he'll sell his set up :)
|
2 Attachment(s)
Here's my long runner set up. I used the twins manifold as my inspiration. As you can see it's a bit different. Uses a completely divided set up and waste gates are set up further back but runner length is very similar =-) Hoping to match or at least get close to the same power band...with less over-all power that is haha. Looking for 450-480 MAX whp. GTX3582R Divided A/R 1.06. 4" straight through Exhaust, no cats/mufflers
Attachment 681563 Attachment 681564 |
⬆
That's nice work but you won't get a mile from the without getting arrested !! Haha |
^ haha yea, your probly right
|
All times are GMT -5. The time now is 02:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands