Custom Fuel Rails from the One and Only
crispeed has finally completed the Complete fuel rail kit for the FD. It utilizes 1600 secondary injectors and the stocck primaries. Because of people using different size fuel lines you must provide your fittings. The kit is sweet. Contact me if you need some as Chris is very busy building his car. Here is the pic
http://importformance.com/miscimages/railkit.jpg |
can he make one for a FC eh??
|
Or how about the 13b-re?
|
or 3 rotor?
|
The all important question: price?
Ed |
i would like one for the 2 primaries i have the k2 one for the secondaries but i would love a primary rail that used the stock injectors
|
So the primary rail is built to house the stock side feed injectors? I was hoping he would make a primary rail for top feed injectors so I can run all low impedance injectors.
|
Now that I am looking at the primary injector rail some more, it looks like it is made for top feed injectors. Could you double check this and let me know for sure? Thanks Greg!
|
I have the 1600 secondary injectors but need the fuel rail for them. Please do post a price!
|
Not to go over your head or anything greg but I got a chance to talk to chris and he told me they are for top feed injectors.
|
Ok, im going to add fittings to this kit. I will post definate prices tomorrow afternoon after I get pricing on fittings and what not.
|
hey it's tomorrow afternoon already.. where's the price..?
O' ya, I'm in Japan :D guess I'll check back in a few hrs.. |
Why are the fittings not included? The (FD) stock lines are 5/16" and 99% of the people that convert over to SS braided lines use AN-6.
Are these going to be able to be shipped in a timely matter unlike the last rails he was advertising? I waited over 4-6 months for his rail and ended up making my own. |
any news?
im highly interisted in the primary rail |
I need one!!!!
Hey Greg.....I'm also wondering if they are both top feed....If not I guess I can deal with it but I'll have to wait for the price. Looks good though!!!:D
|
you got a FC and Chris got a FC
So you better say yes to a FC version which are very common to the FD one just some minor trimming here and there :) |
LOL Kabooski, The FC kit is not ready, I am still looking for the best injector pricing so I can offer injectors also
|
Yes they are definately top feed primary and secondary fuel rails for the FD. They are tapped for -6AN as far as i know...
Mine are already in the mail! :D |
Greg,
I would like to run 2x850 primary and 2x1600 secondaries ..can you suggest something ? |
where is the price??? your past your deadline...
|
Ok Guys, here is pricing without fittings
Complete Rail Kit (both top feed) $399 |
will there be a option to just buy the primary rail?
i alredy have the secondary(k2rd) thanks |
I guess that I can split up the kits as people will need just the primary rails
|
how much for just the primary..and when can we order and how...:D
|
$399 Aussie?
The rail material is only like $15-$20 a foot.&nbp Get them cut down and you have about $30 worth of rail material.  Taps cost about $30 to thread the ends.  Brackets worth about $10 in scrap materials.  Bolt and fasteners about another $10.  The machined bungs are about $10 in scrap dowel pieces but require a machine lathe to turn out.  I see about $100 - $150 worh of stuff in that pic on the EXPENSIVE side!  All $ in U.S. dollars... -Ted |
All times are GMT -5. The time now is 06:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands